MikroTik RouterBOARD RBSXTR&R11e-LTE6, SXT LTE6 kit
SXT LTE6 kit-US Affordable connectivity in remote areas. Even if your phone has no reception at all, SXT LTE6 kit can deliver due to its advanced LTE chip design and high-gain antenna. US carrier-certified!
Win-win! We have seen Internet speed doubling in rural areas after switching to CAT6, so there is no need to wait for cable network expansions. When it comes to powering, SXT LTE6 kit-US kit supports a wide voltage range of 18-57V with full 802.3af/at compliance.
SXT LTE6 kit-US Datasheet
Test results
SXT LTE6 kit-US Datasheet
Specifications
Details | |
---|---|
Product code | SXTR&EP06-A |
Architecture | MIPSBE |
CPU | QCA9531 |
CPU core count | 1 |
CPU nominal frequency | 650 MHz |
RouterOS license | 3 |
Operating System | RouterOS |
Size of RAM | 64 MB |
Storage size | 16 MB |
Storage type | FLASH |
MTBF | Approximately 200’000 hours at 25C |
Tested ambient temperature | -40°C to 60°C |
Suggested price | $169.00 |
Powering
Details | |
---|---|
Number of DC inputs | 1 (PoE-IN) |
Max power consumption | 21 W |
Max power consumption without attachments | 5 W |
Cooling type | Passive |
PoE in | 802.3af/at |
PoE in input Voltage | 12-57 V |
PoE-out
Details | |
---|---|
PoE-out ports | Ether2 |
PoE out | Passive PoE up to 57V |
Max out per port output (input 18-30 V) | 600 mA |
Max out per port output (input 30-57 V) | 400 mA |
Max total out (A) | 600 mA |
Total output current | 600mA |
Mobile
Details | |
---|---|
3G Category | R8 (42.2Mbps Downlink, 5.76Mbps Uplink) |
3G bands | 2 (1900MHz) / 5 (850MHz) / 4 (1700MHz) |
LTE Category | 6 (300Mbit/s Downlink, 50Mbit/s Uplink) |
MIMO DL | 2×2 |
LTE FDD bands | 2 (1900MHz) / 4 (1700MHz) / 5 (850MHz) / 7 (2600MHz) / 12 (700MHz) / 13 (700 MHz) / 25 (1900MHz) / 26 (850MHz) / 30 (2300 MHz) / 66 (1700MHz) / 29 (700 MHz) |
Ethernet
Details | |
---|---|
10/100 Ethernet ports | 2 |
Peripherals
Details | |
---|---|
Number of SIM slots | 2 Modem (Micro SIM) |
MiniPCI-e slots | 1 |
Other
Details | |
---|---|
Mode button | Yes |
Test results
Ethernet test results
SXTR&EP06-A | QCA9531 100M two port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 16.3 | 197.9 | 47.0 | 192.5 | 297.6 | 152.4 |
Bridging | 25 bridge filter rules | 16.3 | 197.9 | 47.0 | 192.5 | 80.4 | 41.2 |
Routing | none (fast path) | 16.3 | 197.9 | 47.0 | 192.5 | 233.1 | 119.3 |
Routing | 25 simple queues | 16.3 | 197.9 | 47.0 | 192.5 | 131.4 | 67.3 |
Routing | 25 ip filter rules | 16.3 | 197.9 | 47.0 | 192.5 | 49.1 | 25.1 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Đánh giá
Chưa có đánh giá nào.