RG-AP180-I

Dimensions

(W × D × H)

170 mm ×  86 mm × 43 mm

Weight

Main unit: 0.3 kg

Mounting plate: 0.1 kg

Installation

Installed in 86-type and concealed boxes of the American and European standards or on a wall

Anti-Theft Lock

Kensington lock

Radio Design

Dual-radio, up to a total of four spatial streams

Radio 1: 2.4 GHz, 2 spatial streams: 2 × 2, MIMO

Radio 2: 5 GHz, 2 spatial streams: 2 × 2, MIMO

Operating Frequencies

Radio 1: 802.11b/g/n/ax, 2.400 GHz–2.483 GHz

Radio 2: 802.11a/n/ac/ax, 5.150 GHz–5.350 GHz, 5.470 GHz–5.725 GHz, 5.725 GHz–5.850 GHz

Note: The operating bands vary in different countries.

Data Rate

Radio 1: 2.4 GHz, 575 Mbps

Radio 2: 5 GHz, 2.4 Gbps

Maximum access rate of the AP:

2.4 GHz+5 GHz, 2.975 Gbps

Antenna Type

Built-in smart antenna

Antenna Gain

2.4 GHz: 3 dBi

5 GHz: 3 dBi

Max. Transmit Power

20 dBm

Note: The transmit power varies based on the regulations in different countries and regions.

Power Adjustment

Configurable in increments of 1 dBm

Modulation

OFDM: BPSK@6/9 Mbps, QPSK@12/18 Mbps, 16-QAM@24 Mbps, 64-QAM@48/54 Mbps

DSSS: DBPSK@1 Mbps, DQPSK@2Mbps, and CCK@5.5/11 Mbps

MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, and 1024QAM OFDMA

Receive Sensitivity

802.11b: –91 dBm (1 Mbps), –90 dBm (5 Mbps), –87 dBm (11 Mbps)

802.11a/g: –89 dBm (6 Mbps), –82 dBm (24 Mbps), –78 dBm (36 Mbps), –72 dBm (54 Mbps)

802.11n: HT20: –85 dBm@MCS0, –67 dBm@MCS7

802.11ac: VHT20: –85 dBm (MCS0), –62 dBm (MCS8)

802.11ac: VHT40: –82 dBm (MCS0), –57 dBm (MCS9)

802.11ac: VHT80: –79 dBm (MCS0), –53 dBm (MCS9)

802.11ax: HE80: –79 dBm (MCS0), 53 dBm (MCS9), –52 dBm (MCS11)

802.11ax: HE160: –79 dBm (MCS0), –53 dBm (MCS9), –50 dBm (MCS11)

Bluetooth

Bluetooth 5.1

Fixed Service Port

Uplink:

One 100/1000/2500Base-T Ethernet port with auto-negotiation, supporting IEEE 802.3af/at-compliant PoE (Under 802.3af power supply, external power supply of the LAN1 port is disabled.)

Downlink:

Four 10/100/1000Base-T Ethernet ports with auto-negotiation. The LAN1 port can provide 48 V/10 W PoE power to external devices.

Fixed Management Port

1 × Micro USB console port

Status LED

One power LED

Button

One reset button

Input Power Supply

(1) Power supply using the power adapter (DC input voltage and current: 48 V/0.6 A)

(2) PoE/PoE+ power supply, compliant with the 802.3af/at Ethernet power supply standard

Power Supply to External Device

Supported (48 V DC/10 W)

Max. Power Consumption

25 W

Temperature

Operating temperature: 0°C to 40°C

Storage temperature: –40°C to 70°C

At a height between 3000 m and 5000 m above sea level, every time the altitude increases by 220 m, the maximum temperature decreases by 1°C.

Humidity

Operating humidity: 5% to 95% RH (non-condensing)

Storage humidity: 5% to 95% RH (non-condensing)

Safety Standard

GB 4943.1

EMC Standard

GB/T 9254.1

WLAN Functions

Virtual AP service: RG-AP180-I supports up to 32 virtual APs, with each radio card supporting a maximum of 16 virtual APs.

SSID hiding

Independent authentication mode, encryption mechanism, and VLAN attributes can be configured for each SSID.

Remote Intelligent Perception Technology (RIPT)

RG-AP180-I supports intelligent load balancing based on STA quantity or traffic.

STA limit:

l   SSID-based STA limit

l   Radio card-based STA limit

Bandwidth limit: STA/SSID/AP-based rate limit

Fat/Fit mode switching:

l   When the AP works in fit mode, it can be switched to fat mode via an AC.

l   When the AP works in fat mode, it can be switched to fit mode through the local control port or Telnet mode.

Wireless positioning: RBIS

Wireless marketing: WMC/MCP

Security

PSK and web authentication

Data encryption: WPA (TKIP), WPA-PSK, WPA2 (AES), WEP (64/128-bit)

QR code-based visitor authentication

SM-based authentication

MAB authentication

Data frame filtering: Whitelist, static blacklist, dynamic blacklist

User isolation

Rogue AP detection and containment

Dynamic ACL assignment

RADIUS protocol

CPU protection policy (CPP)

Network Foundation Protection Policy (NFPP)

Routing Switching Functions

IPv4 address: Static IP address or dynamic IP address obtained via DHCP

Multicast: Multicast-to-unicast conversion is supported.

Network Management and Monitoring

Network management via Telnet or TFTP

Web-based management

Fault detection and alarm

Information statistics and logging

Model

Description

RG-AP180-I

Wi-Fi 6 dual-radio common panel-type wireless AP; Supports up to four spatial streams and a maximum access rate of 2.975 Gbps; Supports 802.11a/b/g/n/ac and 802.11ax modes, fit/fat AP mode switchover, 802.3at/af-compliant power supply and local power supply (802.3at/af and local power adapter must be procured otherwise).