IAP-105

802.11n enables the use of wireless as a primary connection with
speed and reliability comparable to a wired LAN. It also increases
performance by utilizing techniques such as channel bonding,
block acknowledgement and MIMO radios. Advanced antenna
technology also increases range and reliability.
The key to ensuring wire-like performance and reliability is Aruba’s
unique Adaptive Radio Management and spectrum analysis
capabilities, which manage the 2.4-GHz and 5-GHz radio bands to
deliver maximum client performance while mitigating any
RF interference.
The multifunction AP-105 can be configured through the Mobility
Controller to provide WLAN access with part-time air monitoring,
dedicated air monitoring for wireless IPS and spectrum analysis,
Remote AP (RAP) functionality or secure enterprise mesh. The
AP-105 features a 100/1000BASE-T Ethernet interface and can
operate from standard 802.3af Power-over-Ethernet (PoE) sources
or a 12-volt DC power supply

WIRELESS RADIO SPECIFICATIONS (CONTINUED)
• Supported todulation types:
– 802.11b: BPSK, QPSK, CCK
– 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Transmit power: Configurable in increments of 0.5 dBm
• Maximum transmit power:
– 2.4GHz: 23 dBm (limited by local regulatory requirements)
– 5 GHz: 23 dBm (limited by local regulatory requirements)
• Maximum ratio combining (MRC) for improved receiver
performance
• Cyclic Delay Diversity for improved downlink RF performance
• Association rates (Mbps):
– 802.11b: 1, 2, 5.5, 11
– 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
– 802.11n: MCS0 – MCS15 (6.5 Mbps – 300 Mbps)
• 802.11n high-throughput (HT) Support: HT 20/40
• 802.11n packet aggregation: A-MPDU, A-MSDU

POWER
• 48 V DC 802.3af PoE
• 12 V DC for external AC supplied power
(adapter sold separately)
• Maximum power consumption: 12.5 watts

ANTENNA
• RF interconnect attenuation (between radio and antennas):
0.5dB
• 4x integrated, omni-directional antenna elements (supporting up
to 2×2 MIMO). Maximum antenna gain:
– 2.4GHz / 3.0dBi
– 5GHz / 4.5dBi

INTERFACES
• Network:
– 1 x 10/100/1000Base-T Ethernet (RJ45), auto-sensing link
speed and MDI/MDX
• Power:
– 1 x DC power connector
• Other:
– 1 x RJ45 console interface

MOUNTING
• Standard:
– Wall
– Tool-less ceiling tile rail (15/16”)
• Optional mounting kit:
– Solid wall mount bracket
– Wall box mount bracket
(fits standard US single gang wall boxes)
– Ceiling tile rail adapters
(15/16” & 9/16” recessed or non-recessed)

MECHANICAL
• Dimensions/weight (unit):
– 132 mm x 135 mm x 45 mm (5.2” x 5.3” x 1.8“)
– 0.3 kg (10.56 oz)
• Dimensions/weight (shipping):
– 195 mm x 170 mm x 55 mm (7.7” x 6.7” x 2.2“)