AP-WAC2100-V2
- AP-WAC2100-V2 Comply with IEEE 802.11ac/b/g/n, dual-band.
- 1200Mbps Data Rate, 2×2 MIMO Technology.
- 1*100/1000Mbps WAN Port, 1*100/1000Mbps LAN Port, faster Ethernet.
- Support active IEEE 802.3af 48V PoE standard.
- Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz).
- SSupport Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP operation mode in FAT AP. With the function of the built-in firewall, IP filter, URL filter, and MAC filter. Comply with IEEE.
Ms Nhan:
- Kinh Doanh
Mr Minh: - Kinh Doanh
Mr Luân: - Kinh Doanh
WhatsApp: - Tư Vấn Giải Pháp
Facebook: - Hỗ Trợ Đơn Hàng
Sales Engineer: - 0989 544 978
Hotline: 0933 719 613
- Kinh Doanh
Mr Minh:
- Kinh Doanh
Mr Luân:
- Kinh DoanhWhatsApp:
- Tư Vấn Giải PhápFacebook:
- Hỗ Trợ Đơn HàngSales Engineer:
- 0989 544 978×
AirPro AP-WAC2100-V2 with 1200Mbps 11ac High Power Ceiling Mount Access Point
AP-WAC2100-V2 is an 11ac Wi-Fi standard Realtek Chipset high power Ceiling Wireless Access Point support 11ac combined 1200Mbps Wi-Fi speed over 2.4GHz (300Mbps) and 5GHz (900Mbps), Gigabit WAN port, make more wireless users can access into it. It is an economic option for hotels, schools, restaurants, or other enterprise places.
FIT/FAT Operation Mode:
- AP-WAC2100-V2 support FIT/FAT operation mode;
- FIT AP mode works with the AC controller, plug and play, central management by AC controller, mostly for enterprise application
- FAT AP mode supports AP, repeater, gateway, WISP operation mode, can be configured by GUI, suits for home mostly
MU-MIMO Technology:
- With MIMO technology, it adopts 256QAM modulation, supports MU-MIMO (Multi-User Multiple-Input Multiple-Output), 4 Spatial steams greatly improves communication efficiency.
Power over Ethernet:
- AP-WAC2100-V2 has integrated IEEE802.3af Power over Ethernet (PoE), for easy installation and lower cost
- So, it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Zero Configurations:
- Supports FIT/FAT AP together, works with Airpro WLAN Controller, configures IP address, ESSID, Channel, Password, upgrade firmware, backup, and restore.
- WLAN controller is easy for administrator access to do remote monitoring/management at any time and any place makes this AP and WLAN controller more professional and cost-effective in Wi-Fi Projects.
AP-WAC2100-V2 Datasheet
| Model | AP-WAC2100-V2 |
|---|---|
| Chipset | RTL8197FH + RTL8812BRH + RTL8211F |
| Standard | 802.11ac/b/g/n, MIMO technology |
| Memory | 128MB DDR2 RAM |
| Flash | 16MB |
| Interface | 1 * 100Mbps RJ45 WAN Port 1 * 100Mbps RJ45 LAN Port 1 * Reset button, press 15 seconds to revert to the default setting |
| Antenna | Built-in 5dBi MIMO Antenna |
| Power consumption | 48V PoE<12W |
| Size | 168mm * 168 mm * 32 mm |
| RF Data Frequency | 2.4G: 802.11b/g/n: 2.4GHz~2484GHz 5GHz: 802.11a/n/ac: 5150MHz ~5850MHz |
| Country code | FCC, IC, ETSI, MKK, MKK1, MKK2, MKK3, NCC, RUSSIAN, CN |
| Modulation | OFDM = BPSK, QPSK, 16-QAM, 64-QAM, 128-QAM DSSS = DBPSK, DQPSK, CCK |
| Throughput | 1200Mbps |
| RF Power (2.4GHz) | 802.11b 11M 17±2dBm 1M 20±2dBm 802.11g 54M 16±2dBm 6M 19±2dBm 802.11n Ht20 MCS7 15±2dBm MCS0 18±2dBm 802.11n HT40 MCS7 15±2dBm MCS0 18±2dBm |
| RF Power (5GHz) | 802.11a 54M 17±2dBm 6M 19±2dBm 802.11n HT20 MCS7 16±2dBm MCS0 18±2dBm 802.11n HT40 MCS7 15±2dBm MCS0 17±2dBm 802.11ac HT80 MCS9 14±2dBm MCS0 16±2dBm |
| Receive Sensitivity (2.4GHz) | 802.11b 11M -85dBm 1M -94dBm 802.11g 54M -72dBm 6M -88dBm 802.11n HT20 MCS7 -70dBm MCS0 -86dBm 802.11n HT40 MCS7 -68dBm MCS0 -85dBm |
| Receive Sensitivity (5GHz) | 802.11a 54M -72dBm 6M -90dBm 802.11n HT20 MCS7 -70dBm MCS0 -88dBm 802.11n HT40 MCS7 -68dBm MCS0 -86dBm 802.11ac Ht80 MCS9 -58dBm MCS0 -85dBm |
| EVM | 2.4G: 802.11b: <-10 dB; 802.11g: <-25 dB; 802.11n: <-28 dB 5G: 802.11a: <-25 dB; 802.11n: <-28 dB; 802.11ac: <-32 dB |
| PPM | ±20ppm |
| Wi-Fi Users | Up to 100 |
| Firmware Features Operation mode | Wireless AP, Gateway, WISP, Wi-Fi Repeater |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP (Dual Access) /PPTP (Dual Access) |
| SSID | Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding |
| Protocols | Ipv4 |
| Management | Firmware GUI, Remote Management, WLAN Controller |
| Package Contents | 1200Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX, or Linux |
| Environment | Operating Temperature: -20~55 Storage Temperature: -40~70 Humidity: 5%~95% non-condensing; Storage Humidity: 5%~90% non-condensing |
There are no reviews yet.