Altai MIS120P
• Four 10/100/1000 BASE-T PoE ports
• Two 100/1000 BASE-X SFP slots
• IP40 aluminum case
• 48 – 57 VDC redundant power with polarity reverse protection
• 4 kV power and data port surge protection
• 8 kV Ethernet ESD protection
• Support ERPS redundant ring technology with recovery time as low as 20 ms
• DIN rail mount
• Support STP/RSTP/MSTP
• Support up to 255 VLAN groups and 4094 VLAN IDs
• Support IGMP snooping v1/v2
• Support RADIUS user access authentication
• Support SSH, SSL, and SNMP v1/v2/v3 management
• Support status monitoring by AltaiGate or AltaiCare On Premises virtual appliance
Zalo:
- Kinh Doanh OnlineWhatsApp:
- Tư Vấn Giải PhápFacebook:
- Hỗ Trợ Đơn HàngSales Engineer:
- 0989 544 978Altai MIS120P
Altai MIS120P is an industrial-grade managed switch featuring four 1GbE PoE ports, and two 100/1000BASE-X SFP slots. The switch, with a rugged IP40 metal case and an ultra-wide temperature range from -40°C to 80°C, is designed to operate in harsh industrial environments such as factory, warehouse, and container port.
Power over Ethernet
The switch supports 802.3at Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair Ethernet cable. Each MIS120P has four 1GbE P.S.E. ports, with a total power budget of 120W.
Redundant Ring and Fast Recovery
The MIS120P supports the advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) redundant ring technology and Spanning Tree Protocols (STP/RSTP/MSTP) for enhancing the system reliability and uptime of any industrial networks. In a ring topology, the recovery time of the data link can be as low as 20 ms.
Secure Management
To enable IT to easily secure any industrial network, the MIS120P offers a wide-range of cybersecurity features that ensure secured switch
Service Controller Altai MIS120P
management, such as SSHv1/v2, SSLv3, RADIUS user account management, and SNMPv3. Furthermore, the switch can be monitored by the AltaiGate or AltaiCare On-Premises virtual appliance.
Applications
The MIS120P is specifically designed to work with Altai APs. A typical use case is as an access switch for an outdoor site, where multiple APs and other devices are co-located. With its anti-shock and anti-vibration capabilities, the switch can readily be used in an RTG or AGV for connecting a Wi-Fi CPE such as A2e and VX200 to a PLC.
Key Features and Benefits
• Four 10/100/1000BASE-T PoE ports
• Two 100/1000BASE-X SFP slots
• IP40 aluminum case
• 48 – 57 VDC redundant power with polarity reverse protection
• 4 kV power and data port surge protection
• 8 kV Ethernet ESD protection
• Support ERPS redundant ring technology with recovery time as low as 20 ms
• DIN-rail mount
• Support STP/RSTP/MSTP
• Support up to 255 VLAN groups and 4094 VLAN IDs
• Support IGMP snooping v1/v2
• Support RADIUS user access authentication
• Support SSH, SSL, and SNMP v1/v2/v3 management
• Support status monitoring by AltaiGate or AltaiCare On-Premises virtual appliance *
Altai MIS120P Datasheet
Hardware Specifications
• Copper Ports 4 x 10/100/1000 PoE Ports
• SFP/Mini-GBIC Slots 2 x 100/1000 SFP Slots
• Console 1 x RS232 Serial Port
• Switch Architecture Store-and-Forward
• Switch Capacity 128 Gbps
• Throughput 8.93 Mpps @ 64-Byte Packet
• Address Table 8K Entries, Automatic Source Address Learning and Aging
• Shared Data Buffer 4 Mbits
• Jumbo Frame 9.6 KBytes
• Reset Button Support
• ESD Protection Contact Discharge: ±8 kV Air Discharge: ±15 kV
• EFT Protection Power Line: ±4 kV Data Line: ±2 kV
• Enclosure IP40 Aluminum Case
• Installation DIN-Rail Mount
• DC Connector Removable 6-Pin Terminal Block
• LED Power: Green System: Green Per RJ45 Port: LNK/ACT (Green) Per SFP Port: LNK/ACT (Green) Dimensions 145 x 134.5 x 47.5mm
• Weight 0.6kg
• Input Power DC 48 – 57VDC
• Power Consumption Max 8W
Power Over Ethernet
• PoE Standard IEEE 802.3af/at, max. 30W
• Power Supply Pin 1/2 (+), 3/6 (-)
• PoE Power Budget Max 120W (48 VDC)
Software Features
• Port Mirroring Support
• VLAN 802.1q Tagged-Based VLAN GVRP Up to 255 VLAN Groups Up to 4094 VLAN IDs
• Link Aggregation IEEE 802.3ad LACP/Static Trunk
• QoS 8-Level Priority for Switching Port Number 802.1p DSCP/TOS
• IGMP Snooping IGMP (v1/v2) Snooping
• Bandwidth Control Per Port Bandwidth Control
• Storm Control Unicast/Multicast/Broadcast
• Redundancy ERPS ring, Self-Healing < 20 ms STP/RSTP/MSTP
• DHCP DHCP Client DHCP Snooping
• Network Security Port Isolation MAC/IP Address Binding Dynamic ARP Inspection RADIUS User Access
• Mgmt. Interface CLI Web (HTTP/HTTPS) SNMP v1/v2c/V3 SSH Telnet
• Mgmt. Platform AltaiGate/AltaiCare On-Premises*
Environment
• Operating Temp. -40 to +80°C
• Storage Temp. -40 to +85°C
• Humidity 5 to 90% (Non-Condensing)
• MTBF 539,608 Hours
Certification
• EMC FCC Part 15 Subpart B EN 55024 EN 55032
• Free Fall IEC 60068-2-32
• Shock IEC 60068-2-27
• Vibration IEC 60068-2-6
• Safety IEC 62368-1
Product Ordering Information
MIS120P (Part No.: SD.IS120-1223-000)
• Industrial 6 Gigabit Ports Managed PoE Switch Optional Module
• 1.25Gb/s 20 km SFP Transceiver, Single-mode
Contact Us
• Email: luan@phuyenxanh.vn
There are no reviews yet.