A3-Ei
• High capacity 1.3 Gbps in 5 GHz and 450 Mbps in 2.4 GHz
• Built-in 2.4 and 5 GHz 3×3 MIMO spatial polarized antennas
• 3×3 MIMO in 3 streams for both 2.4GHz (802.11b/g/n) and 5GHz (802.11a/n/ac) radios
• IP-67 rated carrier grade 802.11a/b/g/n/ac AP for outdoor applications
• Fill-in coverage area in challenging RF environment
• AltaiCare cloud-based zero configuration and secured AP management
• Multi-operating modes allowed: AP, bridge, repeater mode or CPE
• 802.3at and 802.2af compliant PoE
- Kinh Doanh
Mr Minh:
- Kinh Doanh
Mr Luân:
- Kinh DoanhWhatsApp:
- Tư Vấn Giải PhápFacebook:
- Hỗ Trợ Đơn HàngSales Engineer:
- 0989 544 978A3-Ei Dual-band 3x3 Outdoor 802.11n/ac, Built-in 2.4 GHz and 5 GHz Sector Antennas
Altai A3-Ei Outdoor 802.11ac 3×3 Access Point
The Altai A3-Ei Dual-band 3×3 WiFi Access Point is designed to be used in Altai Super WiFi systems to provide high capacity 2.4 GHz and 5 GHz dual-band dual-concurrent access coverage for both outdoor and indoor areas, and to increase system capacity, extend coverage, fill-in areas of low or blocked signals caused by obstructions. It is capable of providing the highest possible data throughput and capacity that the 802.11ac 3×3 3-stream MIMO standards can offer.
Altai A3-Ei for Dual-band Micro Coverage
The A3-Ei has both a high capacity 2.4 GHz (3×3:3 802.11b/g/n) radio and a 5 GHz (3×3:3 802.11a/n/ac) radio which can be operated at the same time for 2.4 GHz and 5 GHz dual-band dual-concurrent access coverage. The dual-band operations not only provide the highest capacity up to 1.75 Gbps but also perform better in the less interfered 5 GHz frequency band.
Super Dual-band Coverage
| Max. LOS CPE | 3 km (2.4 GHz) 2 km (5 GHz) |
| Max. LOS Smartphones | 1 km (2.4 GHz) 800 m (5 GHz |
| Max. LOS Bridge | 11 km (5 GHz) |
| Max. Data Rate | 450 + 1300 Mbps |
Altai A3-Ei for Dual-band Wireless Access
The A3-Ei can be used for wireless broadband access for both the residential users and commercial customers. It supports concurrent 2.4 GHz and 5 GHz dual-band operations, and is a cost effective and flexible solution which supports long access range with an Altai C1n or C1an CPE for 2.4 GHz and 5 GHz operation respectively.
Extra High Capacity PTP/PTMP Bridging
The A3-Ei supports up to 1.3 Gbps data rate high capacity PTP/PTMP bridging, fulfilling extra high throughput, high user capacity and fully IP-67 weatherproof bridging requirements. This is commonly used for hub site bridging such as campus network, city network or surveillance.
As an integral part of our Super WiFi network infrastructure, key benefits of the Altai A3-Ei include:
- Multi-operating modes allowed: AP, bridge, repeater mode or CPE
- 3×3:3 MIMO for both 2.4 GHz (802.11b/g/n) and 5 GHz (802.11a/n/ac) radios
- Built-in 2.4 GHz and 5 GHz 3×3 spatial polarized high gain sector antennas
- High capacity 1300 Mbps in 5 GHz and 450 Mbps in 2.4 GHz
- 2.4 GHz and 5 GHz dual-band dual concurrent access
- IP-67 rated carrier grade dual-band AP for both outdoor and indoor applications
- Fill-in coverage area in challenging RF environment
- Light weight with built-in lightning protection
- Easy installation & web-based management
Altai A3-ei Datasheet
Wireless Interfaces
802.11b/g/n (3×3:3) Radio
• Operating Mode: AP/CPE/Repeater
• Standard: IEEE 802.11b/g/n
• Operating Frequency:
2.400 – 2.484 GHz (Ch 1-13)
• Transmit Power: 30 dBm (Max.) 25 dBm (Per Chain)
• Receiver Sensitivity (Typical):
802.11b 11 Mbps -90 dBm; 1 Mbps -100 dBm 802.11g 54 Mbps -79 dBm; 6 Mbps -92 dBm 802.11n HT20 -92 dBm; HT40 -88 dBm
802.11a/n/ac (3×3:3) Radio
• Operating Mode: AP/CPE/Bridge/Repeater
• Standard: IEEE 802.11a/n/ac
• Operating Frequency:
5.150 – 5.350 GHz 5.470 – 5.725 GHz 5.725 – 5.850 GHz
• Transmit Power: 30 dBm (Max.) 25 dBm (Per Chain)
• Receiver Sensitivity (Typical):
802.11a 54 Mbps -79 dBm; 6 Mbps -93 dBm 802.11n HT20 -94 dBm; HT40 -90 dBm 802.11ac VHT20 -93 dBm; VHT40 -90 dBm VHT80 -87 dBm
For both 2.4 and 5 GHz
• 32 SSID (16 SSID per Radio)
• WMM, 802.11h, 802.11k, 802.11r, 802.11v, 802.11w
• Passpoint (Release 2)
• Fast Roaming
• Band Steering
• Multi-AP Steering
• Smart Load Balancing
• Dual-Radio Redundancy
• 1+ N Redundancy
• Smart Mesh Networking*
• Auto Channel Selection and TX Power Control
• Bandwidth Control Per SSID/Client
• Altai AirFi™ Throughput Optimization
Antennas
2.4 GHz Antenna
• Built-in Antenna 12 dBi Sector
• Frequency 2.4 – 2.5 GHz
• Polarization 3×3 MIMO Spatial Polarized
• Horizontal Beamwidth 60° (-3 dB)
• Vertical Beamwidth 25° (-3 dB)
• VSWR 2 (Max.)
5 GHz Antenna
• Built-in Antenna 13 dBi Sector
• Frequency 5.150 – 5.875 GHz
• Polarization 3×3 MIMO Spatial Polarized
• Horizontal Beamwidth 80° (-3 dB)
• Vertical Beamwidth 12° (-3 dB)
• VSWR 2 (Max.)
Networking
• Switch (Bridge) and Gateway Mode
• IPv4/IPv6 Dual-Stack
• NAT
• DHCP Client/Server
• PPPoE Client
• Soft-GRE
• VLAN
• Multicast Rate Filter/IGMP Snooping
Security
• Authentication – Open, Shared key, WPA/WPA-PSK, WPA2/WPA2-PSK, WPA3*, 802.1x (EAP-PEAP/TLS/TTLS/SIM/AKA)
• Encryption – WEP, TKIP, AES
• Inter/Intra-SSID Client Isolation
• MAC-based Access Control (White/Black List)
• RADIUS/Active directory
• Dynamic VLAN Assignment
• Firewall
• WIDS/WIPS
• Broadcast/Multicast/Unicast Flooding Control
Management
• Management Platforms: Standalone, AltaiGate, AltaiCare, AtlaiCare Appliance
• Web User Interface
• Command Line Interface (SSH)
• Remote Factory Reset
• Trusted Management IP List
• SNMP v1/v2c /v3
• MIB2/IF-MIB/Altai Enterprise MIB
• Syslog
• Spectral Analysis*
• KPI Monitoring*
• Client OS and Hostname Detection
Physical Specifications
• Dimension: 491 x 221 x 73mm
• Weight: 2.1 kg (Without Mounting Kit)
• Mounting Pole or Wall-mounted
• Network Interface: 10/100/1000 Mbps Ethernet Port
Power
• Power Supply: 802.3at PoE PD or 56 VDC Passive PoE PD
• Power Consumption: 10 W (Typical)/25 W (Max.)
Environmental Specifications
• Operating Temperature: -40 °C to +60 °C (Ambient)
• Storage Temperature: -40 °C to +80 °C
• Humidity: Up to 95% (Non-Condensing)
• Lightning Protection EN 61000-4-5
• Wind Loading Up to 216 km/h (134 mph)
• Weatherproof IP67 Compliant
Certifications
• FCC/CE/Others
• RoHS Compliance
Product Ordering Information
A3-Ei (Part No.: SD.A3-EH00-00)
Standard Package
• A3-Ei Dual-band 3×3 802.11ac WiFi AP with Built-in 2.4 GHz and 5 GHz Sector Antennas (Model No.: WA3311NAC-E)
• Mounting Kit
Optional Accessories:
• 56 VDC Passive PoE Injector (Optional)
Contact Us:
Email: luan@phuyenxanh.vn
1 review for A3-Ei
Add a review
You must be logged in to post a review.
phuyenxanh –
Super WiFi Altai A3-Ei là dòng sản phẩm cao cấp chuyên cho Các cảng biển, bến bãi và kho cảng cao cấp.