Add to wishlistAdded to wishlistRemoved from wishlist0
WSG1812X-PWR Wireless Integrated Multi-Service Gateway is well designed and positioned for SMB network. It features gateway, security and AC function integration, reducing the number of devices and TCO in network. It adopts the innovative Comware V7 platform (referred to as V7 hereafter). V7 comes with the standard granular user control management, comprehensive RF resource management, 7×24 wireless security control, fast layer-2 and layer-3 roaming, strong QoS and IPv4/IPv6 dual stack. V7 adds in various novel wireless technologies such as multi-core control plane, Bonjour and Hotspot 2.0.
WSG1812X-PWR Wireless Integrated Multi-Service Gateway includes AP license as following by default, which protects customer’s investment to maximum, which also give SMB/SME a great opportunity to add new AP with the wireless network expansion without additional cost. The number of licenses is up to 64, and 32 licenses are built-in by default. Which means WSG1812X-PWR can manage 32 ordinary AP or 64 wall-plate AP by default. Need to purchase extra license to enlarge the ordinary AP number. (Version supported since WSG1800X-CMW710-E5623) and It also supports multiple network configurations such as cloud management. When paired with H3C SMB APs (See ordering information for details), it serves as an ideal access control solution for WLAN access of SMB network.
UL 60950-1
CAN/CSA C22.2 No 60950-1
IEC 60950-1
EN 60950-1/A11
AS/NZS 60950
EN 60825-1
EN 60825-2
EN60601-1-2
FDA 21 CFR Subchapter J
EMC
ETSI EN 300 386 V1.3.3:2005
EN 55024: 1998+ A1: 2001 + A2: 2003
EN 55022 :2006
VCCI V-3:2007
ICES-003:2004
EN 61000-3-2:2000+A1:2001+A2:2005
EN 61000-3-3:1995+A1:2001+A2:2005
AS/NZS CISPR 22:2004
FCC PART 15:2005
GB 9254:1998
GB/T 17618:1998
Number of managed APs by default: 32 ordinary AP or 64 wall-plate AP
Maximum number of managed APs: 64
Maximum users of authentication: 1024
802.11MAC
802.11 Protocols
The number of SSID of whole machine: 32
SSID hiding
11G protection
11n only
Use number limit: Supported: SSID based, per RF based
Keepalive
Idle
Multi-country code assignment
Wireless user isolation: VLAN based wireless users 2-layer isolation and SSID based wireless user 2-layer isolation
20MHz/40MHz auto-switch in 40MHz mode
Local forwarding: Local forwarding based on SSID+VLAN
CAPWAP
Automatic AP registration
AC discovery (DHCP option43, DNS)
IPv6 tunnel
Clock synchronization
Assign basic AP network parameter through AC: Supported: Static IP, VLAN, connected AC address
L2/L3 connection between AP and AC
NAT traversal between AP and AC
Roaming
Intra-AC, Inter-AP L2 and L3 roaming
Inter-AC, Inter-AP L2 and L3 roaming
GW Features
PPPoE
NAT
DDNS
SSL VPN
IPSEC VPN
RIP
GRE
Access Control
Open system, Shared-Key
WEP-64/128, dynamic WEP
WPA,WPA2,WPA3
TKIP
CCMP
SSH v1.5/v2.0
Portal authentication: Supported: Remote Authentication, external server
Portal page redirection: Supported: SSID based, AP Portal page push
Portal by-pass Proxy
802.1x authentication: EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-MD5, EAP-SIM, LEAP, EAP-FAST, EAP offload (TLS, PEAP only)
Local authentication: 802.1X, Portal, MAC authentication
LDAP authentication: 802.1X and Portal with EAP-GTC and EAP-TLS supported by 802.1X login
AP location-based user access control
Guest Access control
VIP channel
ARP attack detection: Supported: Wireless SAVI
SSID anti-spoofing: SSID + user name binding
AAA server selection based on SSID and domain
AAA server back up
Local AAA server for wireless user
TACACS+
QoS
Priority mapping
L2-L4 packet filtering and traffic classification
Rate limit
802.11e/WMM
Access control based on user profile
Intelligent bandwidth limit (equal bandwidth share algorithm)
Intelligent bandwidth limit (user specific)
Intelligent bandwidth guarantee
QoS Optimization for SVP phone
CAC(Call Admission Control)
End-to-end QoS
AP upload speed limit
RF management
Country code lock
Static channel and power configuration
Auto channel and power configuration
Auto transmission rate adjustment
Coverage hole detection and correction
Load balancing: Supported: based on traffic, user & frequency (dual-frequency supported)
Intelligent load balancing
AP load balancing group: Supported: auto-discovery and flexible setting
Security
Static blacklist
Dynamic blacklist
White list
Rogue AP detection: Supported: SSID based, BSSID, device OUI
Rouge AP countermeasure
Flooding attack detection
Spoof attack detection
Weak IV attack detection
WIPS/WIDS: Supported: 7-layer mobile security
Layer 2 protocol
ARP (gratuitous ARP)
802.1p
802.1q: Maximum VLANs: 4094)
802.1x
IP protocol
IPv4 protocol
Native IPv6
IPv6 SAVI
IPv6 Portal
Multicast
MLD Snooping
IGMP Snooping
Multicast group: 256
Multicast to Unicast (IPv4, IPv6): Supported: Set unicast limit based on operating environment
Redundancy
1+1 failover between ACs
Intelligent AP sharing among ACs
Remote AP
Scheduled shutdown of AP RF interface
Scheduled shutdown of wireless service
Per-packet power adjustment (PPC)
WLAN Application
RF Ping
Remote probe analysis
Packet forwarding fairness adjustment
802.11n packet forwarding suppression
Access based traffic shaping
Co-AP channel sharing
Co-AP channel reuse
RF interface transmission rate adjustment algorithm
Drop wireless packet with weak signal
Disable user access with weak signal
Disable multicast packet caching
Status blink(limited to some AP)
Attack protection against malicious attacks, such as land, smurf, fraggle, ping of death, teardrop, IP spoofing, IP fragmentation, ARP spoofing, reverse ARP lookup, invalid TCP flag, large ICMP packet, address/port scanning, SYN flood, ICMP flood, UDP flood, and DNS query flood
ASPF application layer packet filtering
Basic and advanced ACLs
Time range-based ACL
User-based and application-based access control
Static and dynamic blacklist function
MAC-IP binding
MAC-based ACL
Antivirus
Signature-based virus detection
Manual and automatic upgrade for the signature database
Stream-based processing
Virus detection based on HTTP, FTP, SMTP, and POP3
Virus types include Backdoor, Email-Worm, IM-Worm, P2P-Worm, Trojan, AdWare, and Virus
Virus logs and reports
Signature-based virus detection
Deep intrusion prevention
Prevention against common attacks such as hacker, worm/virus, Trojan, malicious code, spyware/adware, DoS/DDoS, buffer overflow, SQL injection, and IDS/IPS bypass
Attack signature categories (based on attack types and target systems) and severity levels (including high, medium, low, and notification)
Manual and automatic upgrade for the attack signature database (TFTP and HTTP).
P2P/IM traffic identification and control
Many-to-one NAT, which maps multiple internal addresses to one public address
Many-to-many NAT, which maps multiple internal addresses to multiple public addresses
One-to-one NAT, which maps one internal address to one public address
NAT of both source address and destination address
External hosts access to internal servers
Internal address to public interface address mapping
NAT support for DNS
Setting effective period for NAT
NAT ALGs for NAT ALG, including DNS, FTP, H.323, ILS, MSN, NBT, PPTP, and SIP
- Kinh Doanh
- Kinh Doanh
- Tư Vấn Giải Pháp
- Hỗ Trợ Đơn Hàng
- 0989 544 978
There are no reviews yet.