RG-AP720-L
- RG-AP720-L Wi-Fi 5 Dual-Radio 1167 Mbps Indoor AP
- Indoor scenarios for higher education, government, general education, finance, and business sectors.
- Dual Radios, Combined Rate Up to 1167 Mbps
- Signals Never Drop with Seamless Roaming
- Auto Configuration, Simplified Provisioning, Easy Deployment
- Unified Cloud Management, Intelligent Tuning, Easy O&M
- This AP provides both a stable 5 GHz band, and a wide-coverage 2.4 GHz band. Dual radios ensure stable connectivity for more STAs
- The built-in smart antenna can identify the direction of STAs relative to the AP. With Ruijie’s proprietary roaming algorithm, this AP also supports 802.11k/v/r. Intelligent channel planning and accurate wireless positioning enable STAs to associate to the best AP nearby.
- You do not need to pre-configure this AP before installation. Once connected to a Ruijie wireless AC, this AP can obtain configurations from the AC to complete provisioning, thus greatly reducing the implementation and maintenance workload.
- Kinh Doanh
Mr Minh:
- Kinh Doanh
Mr Luân:
- Kinh DoanhWhatsApp:
- Tư Vấn Giải PhápFacebook:
- Hỗ Trợ Đơn HàngSales Engineer:
- 0989 544 978
Dimensions and Weight | RG-AP720-L |
Unit dimensions (W x D x H) | 194 mm x 194 mm x 37 mm (7.64 in x 7.64 in x 1.46 in) |
Shipping dimensions (W x D x H) | 460 mm x 360 mm x 242 mm (18.11 in x 14.17 in x 9.53 in) |
Unit weight | Main unit: 0.42 kg (0.93 lbs) Mounting bracket: 0.07 kg (0.15 lbs) |
Shipping weight | 0.87 kg (1.92 lbs) |
Mounting | Wall/Ceiling-mount (a mounting bracket is delivered with the main unit) |
Lock option | Kensington lock and securing latch |
Wi–Fi Radio | RG-AP720-L |
Radio design | Dual-radio and up to four spatial streams: ● Radio 1: 2.4 GHz, two spatial streams, 2×2 MIMO ● Radio 2: 5 GHz, two spatial streams, 2×2 MU-MIMO |
Operating frequencies | Radio 1, 802.11b/g/n: ● 2.400 GHz to 2.4835 GHz, ISM Radio 2, 802.11a/n/ac: ● 5.150 GHz to 5.250 GHz, U-NII-1 ● 5.250 GHz to 5.350 GHz, U-NII-2A ● 5.470 GHz to 5.725 GHz, U-NII-2C ● 5.725 GHz to 5.850 GHz, U-NII-3/ISM Note: Country-specific restrictions apply. |
Data rates | Combined peak data rate: 1.167 Gbps 2.4 GHz radio ● Two spatial stream Single User (SU) MIMO for up to 300 Mbps wireless data rate to individual 2SS HT40 802.11n client devices (max.) ● Two spatial stream Single User (SU) MIMO for up to 144.4 Mbps wireless data rate to individual 2SS HT20 802.11n client devices (typical) 5 GHz radio ● Two spatial stream Single User (SU) MIMO for up to 867 Mbps wireless data rate to individual 2SS HT80 802.11ac client devices (typical) |
Data rate set | The following 802.11-compliant data rates in Mbps are supported: 2.4 GHz radio ● 802.11b: 1, 2, 5.5, 11 ● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 ● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) 5 GHz radio ● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 ● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) ● 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80) |
Packet aggregation | 802.11n/ac: A-MPDU and A-MSDU |
Antenna type | Built-in omnidirectional antenna (two 2.4 GHz antennas and two 5 GHz antennas) |
Max. antenna gain | 4.3 dBi in 2.4 GHz and 5.7 dBi in 5 GHz The downtilt angle for the maximum gain is roughly 30 degrees. With reference to the pattern of each antenna of the MIMO radios, the maximum gain of the effective per-antenna pattern is 3.6 dBi in the 2.4 GHz radio and 4.0 dBi in the 5 GHz radio. |
Max. transmit power | 2.4 GHz radio: 26 dBm (23 dBm per chain) 5 GHz radio: 26 dBm (23 dBm per chain) Note: The transmit power is limited by local regulatory requirements. |
Radio technologies | 802.11b: Direct-Sequence Spread-Spectrum (DSSS) 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM) |
Modulation types | 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM |
The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.
Wi–Fi Radio Frequency Performance | RG-AP720-L | ||
Frequency Band and Protocol | Data Rate | Max. Transmit Power per Transmit Chain | Max. Receive Sensitivity per Receive Chain |
2.4 GHz, 802.11b | 1 Mbps | 23 dBm | –91 dBm |
2 Mbps | 23 dBm | –89dBm | |
5.5 Mbps | 23 dBm | –88 dBm | |
11 Mbps | 23 dBm | –85 dBm | |
2.4 GHz, 802.11g | 6 Mbps | 23 dBm | –89 dBm |
24 Mbps | 23 dBm | –80 dBm | |
36 Mbps | 21 dBm | –76 dBm | |
54 Mbps | 19 dBm | –70 dBm | |
2.4 GHz, 802.11n (HT20) | MCS0 | 21 dBm | –83 dBm |
MCS7 | 19 dBm | –65 dBm | |
2.4 GHz, 802.11n (HT40) | MCS0 | 21 dBm | –80 dBm |
MCS7 | 18 dBm | –62 dBm | |
5 GHz, 802.11a | 6 Mbps | 23 dBm | –89 dBm |
24 Mbps | 23 dBm | –80 dBm | |
36 Mbps | 21 dBm | –76 dBm | |
54 Mbps | 19 dBm | –70 dBm | |
5 GHz, 802.11n (HT20) | MCS0 | 20 dBm | –83 dBm |
MCS7 | 18 dBm | –65 dBm | |
5 GHz, 802.11n (HT40) | MCS0 | 19 dBm | –80 dBm |
MCS7 | 18 dBm | –62 dBm | |
5 GHz, 802.11ac (VHT20) | MCS0 | 20 dBm | –82 dBm |
MCS9 | 17 dBm | –57 dBm | |
5 GHz, 802.11ac (VHT40) | MCS0 | 19 dBm | –79 dBm |
MCS9 | 16 dBm | –54 dBm | |
5 GHz, 802.11ac (VHT80) | MCS0 | 19 dBm | –76 dBm |
MCS9 | 16 dBm | –51 dBm | |
5 GHz, 802.11n (HT20) | MCS0 | 20 dBm | –83 dBm |
MCS11 | 18 dBm | –65 dBm | |
5 GHz, 802.11n (HT40) | MCS0 | 19 dBm | –80 dBm |
MCS11 | 18 dBm | –62 dBm | |
Ports | RG-AP720-L |
Fixed service port | 1 x 10/100/1000Base-T RJ45 Ethernet port with auto-negotiation ● Compliance with IEEE 802.3af standard (PoE) ● Auto MDI/MDIX crossover ● PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher) ● 802.3az EEE |
Fixed management port | 1 x RJ45 console port (serial console port) |
Status LED | 1 x multi-color system status LED |
Button | 1 x Reset button ● Press the button for shorter than 2 seconds. Then the device restarts. ● Press the button for longer than 3 seconds. Then the device restores to factory settings. |
Power Supply and Consumption | RG-AP720-L |
Input power supply | The AP supports the following two power supply modes: ● 12 V DC/1.5 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately. ● PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE). Note: ● If both DC power and PoE are available, DC power is preferred. |
Power consumption | Max power consumption: 12.95 W ● DC powered: 12.95 W ● PoE powered (802.3af): 12.95 W ● PoE+ powered (802.3at): 12.95 W ● PoE++ powered (802.3bt): 12.95 W ● Idle mode: 6 W |
Environment and Reliability | RG-AP720-L |
Temperature | Operating temperature: –10°C to +50°C (14°F to +122°F) Storage temperature: –40°C to +70°C (–40°F to +158°F) Note: At an altitude between 3,000 m (9,843 ft) and 5,000 m (16,404 ft), every time the altitude increases by 220 m (722 ft), the maximum temperature decreases by 1°C (1.8°F). |
Humidity | Operating humidity: 5% to 95% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing) |
Environment standard | Storage and operating environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995 |
Mean Time Between Failure (MTBF) | 200,000 hours (22 years) at the operating temperature of 25°C (77°F) |
Certifications and Regulatory Compliance | RG-AP720-L |
Regulatory compliance | GB 4943.1 CE Marked EN 301 489, EN 50155, EN 50121 IEC/EN 60950-1, IEC/EN 62368-1, IEC/EN 62368-1 RED Directive 2014/53/EU EMC Directive 2014/30/EU Low Voltage Directive 2014/35/EU |
Certifications | Wi-Fi Alliance: ● Wi-Fi CERTIFIED™ a, b, g, n, ac ● WPA™ – Enterprise, Personal ● WPA2™ – Enterprise, Personal ● WPA3™ – Enterprise, Personal ● Wi-Fi Enhanced Open™ ● WMM® |
*For more country-specific regulatory information and approvals, contact your local sales agency.
Applicable Software Version | RG-AP720-L |
Applicable software version | RGOS 11.1(9)B1P30 or higher |
WLAN | RG-AP720-L |
Number of associated STAs | 256 ● Radio 1: 2.4 GHz, 100 STAs ● Radio 2: 5 GHz, 156 STAs |
Max. number of BSSIDs | 32 (up to 16 BSSIDs per radio) |
STA management | SSID hiding Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. Remote intelligent perception technology (RIPT) Intelligent load balancing based on the STA quantity or traffic |
STA limiting | SSID-based STA limiting Radio-based STA limiting |
Bandwidth limiting | STA/SSID/AP-based rate limiting |
Wireless roaming | Layer 2 and Layer 3 roaming |
Security | RG-AP720-L |
Authentication and encryption | Remote Authentication Dial-In User Service (RADIUS) PSK, web, and 802.1X authentication QR code-based guest authentication (used with the RG-WS series wireless access controller) SMS authentication (used with the RG-WS series wireless access controller) MAB authentication (used with the RG-WS series wireless access controller) Data encryption: WPA (TKIP), WPA-PSK, WPA2 (AES), WEP (64/128-bit) |
Data frame filtering | Allowlist, static blocklist, and dynamic blocklist |
WIDS | User isolation Rogue AP detection and containment |
ACL | Dynamic ACL assignment |
CPP | Supported |
NFPP | Supported |
Routing and Switching | RG-AP720-L |
IP service | Static IPv4 address IPv4 DHCP client FTP ALG and DNS ALG |
Multicast | Multicast Multicast-to-unicast conversion |
IPv6 basics | IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping, IPv6 Tracert |
IP routing | IPv4/IPv6 static routing |
VPN | PPPoE client |
Management | RG-AP720-L |
Network management | Fault inspection and alarm Information statistics and logging |
Network management platform | Web-based management (Eweb) |
User access management | Telnet, SNMP, and TFTP-based management |
Fat/Fit/Cloud mode switchover | When the AP works in Fit mode, it can be switched to Fat mode through an AC. When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet. When the AP works in Cloud mode, it can be managed through Ruijie Cloud. |
Model | Description |
RG-AP720-L | Dual-radio indoor wireless access point Data rate of up to 1,167 Mbps Compliance with IEEE 802.11a/b/g/n and 802.11ac Wave2 standards Fat/Fit/Cloud mode switchover One uplink electrical port IEEE 802.3af-compliant (PoE) power supply and DC power supply |
There are no reviews yet.