RG-AP680-AR

Dimensions (W × D × H)

300 mm × 300 mm × 94 mm

Weight

AP: ≤ 4.5 kg

Mounting bracket: ≤ 1.5 kg

Installation

Wall-mounted or pole-mounted

Radio Design

Quad-radio design, four RF ports, and the fourth RF port supports flexible switching between 2.4 GHz and 5 GHz

Up to 14 spatial streams

Radio 1: 2.4 GHz, 4 spatial streams: 4 × 4, MU-MIMO

Radio 2: 5 GHz, 4 spatial streams: 4 × 4, MU-MIMO

Radio 3: 5 GHz, 4 spatial streams: 4 × 4, MU-MIMO

Radio 4: 2.4/5 GHz, 2 spatial streams: 2 × 2, MIMO

Operating Frequencies

Radio 1: 802.11b/g/n/ax, 2.400 GHz–2.483 GHz

Radio 2: 802.11a/n/ac/ax, 5.150 GHz–5.350 GHz, 5.470 GHz–5.725 GHz, 5.725 GHz–5.850 GHz

Radio 3: 802.11a/n/ac/ax, 5.150 GHz–5.350 GHz

Radio 4:

802.11b/g/n, 2.400 GHz–2.483 GHz

802.11a/n/ac, 5.150 GHz–5.350 GHz, 5.470 GHz–5.725 GHz, 5.725 GHz–5.850 GHz

Note: The operating bands vary in different countries.

Data Rate

Radio 1: 2.4 GHz, 1.15 Gbps

Radio 2: 5 GHz, 4.8 Gbps

Radio 3: 5 GHz, 4.8 Gbps

Radio 4: 2.4 GHz/5 GHz, 300 Mbps/867 Mbps

Max. Access Rate of the AP

2.4 GHz + 5 GHz + 5 GHz + 2.4 GHz, 11.05 Gbps

2.4 GHz + 5 GHz + 5 GHz + 5 GHz, 11.617 Gbps

Antenna Type

Built-in smart antenna, supporting switchover between the built-in and external antennas

Antenna Gain

2.4 GHz: 3 dBi

5 GHz: 3 dBi

Maximum Transmit Power

29 dBm

Note: The transmit power varies based on the regulations in different countries and regions.

Power Adjustment

Configurable in increments of 1 dBm

Modulation

OFDM: BPSK@6/9 Mbps, QPSK@12/18 Mbps, 16-QAM@24 Mbps, 64-QAM@48/54 Mbps

DSSS: DBPSK@1 Mbps, DQPSK@2 Mbps, and CCK@5.5/11 Mbps

MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, and 1024QAM

OFDMA

Receiver Sensitivity

802.11b: –96 dBm (1 Mbps), –93 dBm (5 Mbps), –89 dBm (11 Mbps)

802.11a/g: –91 dBm (6 Mbps), –85 dBm (24 Mbps), –80 dBm (36 Mbps), –74 dBm (54 Mbps)

IEEE 802.11n: –90 dBm (MCS0), –70 dBm (MCS7), –89 dBm (MCS8), –68 dBm (MCS15)

802.11ac: 20 MHz: –88 dBm (MCS0), –63 dBm (MCS9)

802.11ac: 40 MHz: –85 dBm (MCS0), –60 dBm (MCS9)

802.11ac: 80 MHz: –85 dBm (MCS0), –60 dBm (MCS9)

802.11ac: 160 MHz: –80 dBm (MCS0), –55 dBm (MCS9)

802.11ax: 80 MHz: –82 dBm (MCS0), –57 dBm (MCS9), –52 dBm (MCS11)

802.11ax: 160 MHz: –80 dBm (MCS0), –49 dBm (MCS11)

Interface Specifications

RG-AP680-AR

Bluetooth

Bluetooth 5.1

The Bluetooth serial port management mode is used by default. Apple iBeacon protocol is supported, through which rich Bluetooth applications such as shake can be extended.

Support for the Zigbee, RFID, and other IoT protocols via software upgrade

Fixed Service Port

Uplink: One 100/1000/2500/5000Base-T adaptive Ethernet port, supporting IEEE 802.3af/at/bt-compliant PoE

Two 10 Gbps SFP+ adaptive Ethernet optical ports, which are compatible with 2.5 Gbps/1 Gbps optical ports

Downlink: One 10/100/1000Base-T adaptive Ethernet port, which allows the PSE to power external devices (802.3af, 15.4 W) and can connect to Ruijie IoT module

Fixed Management Port

One RJ45 console port

Status LED

One system status LED

Three RSSI LEDs

Button

One reset button

Power Supply and Consumption

RG-AP680-AR

Power Type

1. 100–240 V AC power supply (equipped with the RG-PL-M16-3M cable, and 1 A current must be guaranteed)

2. PoE/PoE+/PoE++ (IEEE 802.3af/at/bt-compliant)

Power Supply to External Devices

Supported. The AP can connect to and supply power to an IoT module through an Ethernet port.

Maximum Power Consumption

≤ 50 W

Temperature

Working temperature: –40°C to 70°C

Storage temperature: –40°C to 85°C

At a height between 3000 m and 5000 m above the sea level, every time the altitude increases by 220 m, the maximum temperature decreases by 1°C.

Humidity

Operating humidity: 0% to 100% RH (non-condensing)

Storage humidity: 0% to 100% RH (non-condensing)

IP Rating

IP68

Anti-corrosion Rating

GB/T 2423.17

Safety Regulations

GB 4943.1, EN 60601-1-2 (medical), UL/CSA 60950-1, EN/IEC 60950-1, and EN/IEC 60950-22

EMC Regulations

GB/T 9254.1, EN301 489, EN 55022, FCC Part15, RSS-210, GB/T 24338.5, and EN 50121

WLAN Functions

Maximum number of allowed connected STAs

1536

Virtual AP service

A maximum of 48 virtual APs can be classified.

SSID hiding

Supported

Separate authentication mode, encryption mechanism, and VLAN attributes for each SSID

Supported

Remote Intelligent Perception Technology (RIPT)

Supported

Intelligent terminal recognition technology

Supported

Intelligent load balancing based on STA quantity or traffic

Supported

STA limit

SSID-based STA limit

Radio card-based STA limit

Bandwidth limit

STA/SSID/AP-based rate limit

Security Functions

PSK and web authentication

Supported

Data encryption

WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3, WEP (64/128 bits)

WeChat-based authentication

Supported

QR code-based visitor authentication

Supported

SM-based authentication

Supported

MAB authentication

Supported

Data frame filtering

Whitelist, static blacklist, dynamic blacklist

User isolation

Supported

Rogue AP detection and containment

Supported

Dynamic ACL assignment

Supported

RADIUS

Supported

CPP

Supported

NFPP

Supported

Routing Switching Functions

IPv4 address

Static IP address or dynamic IP address obtained via DHCP

Multicast

Multicast-to-unicast conversion

PPPoE

PPPoE client

VPN

IPSec VPN

NAT

Supported (including FTP ALG/DNS ALG)

Management and Maintenance

Network management

Network management via Telnet or TFTP

Web-based management

Wireless positioning

RBIS

Wireless marketing

WMC/MCP

Fault detection and alarm

Supported

Information statistics and logging

Supported

Fat/Fit mode switching

When the AP works in fit mode, it can be switched to the fat mode via an AC.

When the AP works in fat mode, it can be switched to the fit mode through the local control port or Telnet mode.

RG-AP680-AR

Wi-Fi 6 quad-radio enhanced industrial wireless AP, supporting 14 spatial flows, maximum access rate of 11.617 Gbps, 802.11a/b/g/n/ac and 802.11ax, PoE/PoE+/PoE++ and 100 to 240 V AC power supply (PoE+ and local power adapters need to be purchased.)

Required

RG-ANTx4-2400D

External antenna used by the RG-AP680-AR, panel directional antenna, 2.4 GHz, 4 × 4 MIMO, antenna gain of 12 dBi, and built-in feeder set: 1 m, N-N, four feeders

Each RG-AP680-AR can equipped with only one feeder set.

Optional

RG-ANTx4-5000D

External antenna used by the RG-AP680-AR switches, panel directional antenna, 5 GHz, 4 × 4 MIMO, antenna gain of 12 dBi, and built-in feeder set: 1 m, N-N, four feeders

Each RG-AP680-AR can equipped with two feeder sets.

Optional

RG-PL-M16-3M

Selected when local 220 V AC mains supply is used. Local external cable, M16 power cable, power cable, 3020 mm, CRCC low smoke zero halogen power cable, red, white, black, 16M-3 A, 1 A, 220 V, RoHS

Optional

RG-E-160 (10GE)

Selected when the power adapter is used for power supply. Single-port Ethernet PoE adapter; Input: 100–240 V, 50/60 Hz, 1.5 A MAX; Output: 54 V DC, 1.11 A

Optional

RG-ANT-GP-N4M

MIMO cylindrical antenna, four N-type female connectors, support for 5 GHz, directional, less wind resistance, bracket installation; 5 GHz (5 GHz–6 GHz), 4 × 4 WLAN antenna, wind pressure level > 5-level wind and 120 km/h piston wind

Optional
(rail transit scenarios)

RG-Cab-NJx8-3m

Trackside feeder, eight feeders with N-J connectors (internal thread and internal needle) at both ends, 3 m in length

Optional
(rail transit scenarios)