RG-AP180 (V3)
- RG-AP180 (V3) Wi-Fi 6 Dual-Radio 2975 Mbps Wall Plate AP
- Indoor scenarios covering higher education, government, general education, finance, hotels, and real estates
- Dual-radio wall plate AP with simple and beautiful design for easy deployment
- Upgraded to Wi-Fi 6, a combined data rate of up to 2975 Mbps
- Enterprise-class security authentication for all-scenario protection
- Unified cloud management, intelligent tuning, and easier O&M
- Wall Plate Access Point RG-AP180（V3)
- All-Scenario Real-Name Access, Enterprise-Class Security Protection
- WIS Cloud Network enables network-wide configuration and optimization. It also supports O&M on the mobile app Wi-Fi Moho.
- Kinh Doanh
Mr Minh:
- Kinh Doanh
Mr Luân:
- Kinh DoanhWhatsApp:
- Tư Vấn Giải PhápFacebook:
- Hỗ Trợ Đơn HàngSales Engineer:
- 0989 544 978
Dimensions and Weight | RG-AP180(V3) |
Dimensions (W x H x D) | 86 mm x 116 mm x 24.1 mm (part outside the wall) + 18.9 mm (part inside the wall) |
Weight | 0.3 kg |
Installation | Embedded in an 86-type panel |
Color | White |
Radio Specifications | RG-AP180(V3) |
Radio Design | Dual-radio Up to four spatial streams Radio 1: 2.4 GHz, 2 spatial streams: 2 x 2, MU-MIMO Radio 2: 5 GHz, 2 spatial streams: 2 x 2, MU-MIMO |
Operating Frequencies | Radio 1: IEEE 802.11b/g/n/ax, 2.400 GHz to 2.483 GHz Radio 2: IEEE 802.11a/n/ac, 5.150 GHz to 5.350 GHz, 5.47 GHz to 5.725 GHz, 5.725 GHz to 5.850 GHz Note: The operating bands vary in different countries. |
Data Rate | Radio 1: 2.4 GHz, 0.575 Gbps Radio 2: 5 GHz, 2.4 Gbps Maximum access rate of the AP: 2.4 GHz+5 GHz, 2.975 Gbps |
Antenna Type | Built-in smart antenna |
Maximum Transmit Power | 100 mW (20 dBm) Note: The transmit power varies according to regulations in different countries and regions. |
Power Adjustment | 1 dBm |
Modulation | IEEE 802.11b: BPSK, QPSK, CCK IEEE 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (dedicated extensibility) IEEE 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, and 256-QAM IEEE 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM |
Receiving Sensitivity | IEEE 802.11b: –91 dBm (1 Mbps), –90 dBm (5 Mbps), –87 dBm (11 Mbps) IEEE 802.11a/g: –89 dBm (6 Mbps), –82 dBm (24 Mbps), –78 dBm (36 Mbps), –72 dBm (54 Mbps) IEEE 802.11n: –85 dBm@MCS0, –67 dBm@MCS7 IEEE 802.11ac HT20: –85 dBm (MCS0), –60 dBm (MCS9) IEEE 802.11ac HT40: –82 dBm (MCS0), –57 dBm (MCS9) IEEE 802.11ac HT80: –79 dBm (MCS0), –53 dBm (MCS9) IEEE 802.11ax HE80: –79 dBm (MCS0), –52 dBm (MCS11) IEEE 802.11ax HE160: –75 dBm (MCS0), –47 dBm (MCS11) |
Port Specifications | RG-AP180(V3) |
Fixed Service Port | Uplink: One 10/100/1000Base-T Ethernet port with auto-negotiation, supporting IEEE 802.3af/at-compliant PoE Downlink: Four 10/100/1000Base-T Ethernet ports with auto-negotiation |
Bluetooth | Bluetooth 5.0 Support for Apple iBeacon protocol, through which rich Bluetooth applications such as shake can be extended |
Fixed Management Port | One micro USB console port |
Status LED | One system indicator |
Button | One reset button |
Power Supply and Consumption | RG-AP180(V3) |
Input Power Requirements | (1) DC power supply (DC input voltage and current: 12 V/1 A) (2) PoE power supply, in compliance with the IEEE 802.3af Ethernet power supply standard |
Maximum Power Consumption | < 10 W |
Environment and Reliability | RG-AP180(V3) |
Temperature | Operating temperature: –10°C to +45°C Storage temperature: –40°C to +70°C At a height between 3000 m and 5000 m above sea level, every time the altitude increases by 220 m, the maximum temperature decreases by 1°C. |
Humidity | Operating humidity: 5% to 95% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing) |
Safety Standard | IEC 60950-1, IEC 62368-1, and GB 4943.1 |
EMC Standard | EN301489, EN55032, EN55035, GB/T 9254.1, and GB/T 9254.2 |
WLAN Functions | RG-AP180(V3) |
Maximum Number of Allowed Connected STAs | 1024 |
Virtual AP Service | 8 (no more than 4 is recommended for each radio in actual applications) |
SSID Hiding | Supported |
Separate Authentication Mode, Encryption Mechanism, and VLAN Attributes for Each SSID | Supported |
Remote Intelligent Perception Technology (RIPT) | Supported |
Intelligent Terminal Recognition Technology | Supported |
Intelligent Load Balancing Based on Terminal Quantity or Traffic | Supported |
STA Limit | SSID-based STA limit Radio-based STA limit |
Bandwidth Limit | STA/SSID/AP-based rate limit |
Security Functions | RG-AP180(V3) |
PSK and Web Authentication | Supported |
Data Encryption | WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3, WEP (64/128 bits) |
WeChat-based Authentication | Supported |
QR Code-Based Visitor Authentication | Supported |
SM-based Authentication | Supported |
MAB Authentication | Supported |
Data Frame Filtering | Whitelist, static blacklist, dynamic blacklist |
User Isolation | Supported |
Rogue AP Detection and Containment | Supported |
Dynamic ACL Assignment | Supported |
RADIUS | Supported |
CPP | Supported |
NFPP | Supported |
Routing Switching Functions | RG-AP180(V3) |
IPv4 Address | Static IP address, or dynamic IP address obtained through DHCP |
Multicast | Multicast-to-unicast conversion |
PPPoE | PPPoE client |
VPN | IPSec VPN |
NAT | Supported (including FTP ALG/DNS ALG) |
Management and Maintenance | RG-AP180(V3) |
Network Management | Network management through Telnet or TFTP Web-based management |
Wireless Positioning | RBIS |
Wireless Marketing | WMC/MCP |
Fault Detection and Alarm | Supported |
Information Statistics and Logging | Supported |
Fat/Fit Mode Switching | When the AP works in fit mode, it can be switched to the fat mode through an AC. When the AP works in fat mode, it can be switched to fit mode through the local control port or Telnet mode. |
Model | Description |
RG-AP180(V3) | Wi-Fi 6 dual-radio common wall plate wireless access point can be installed on an 86-type panel. It supports up to four spatial streams, the maximum access rate 2.975 Gbps, fat/fit mode switching, and IEEE 802.3af power supply and local power supply, and complies with IEEE 802.11a/b/g/n/ac and IEEE 802.11ax |
There are no reviews yet.