Name: PMP 450i Fixed
SKU: C050045A002B
Price: 0989544978 VND
Availability: InStock

Cambium PMP450i 5GHz AP, Connectorized Wideband Access Point

Ultra-wide band radios
Supports the entire band, whether in 5 GHz or 3 GHz. Advanced radio design improves transmit power and increases receive sensitivity.

Rugged metal enclosure
Designed to meet IP-66 and IP-67 standards to withstand harsh environments. Optional ATEX/HAZLOC certified models available for hazardous deployments.

Dynamic Interference Filtering
Provides industryleading noise isolation for improved performance.

Updated FPGA and SoC architecture
Triples the processing power compared to PMP 450.

Multifunction AUX Port
Allows for greater flexibility for deployment by adding a camera or other PoE directly.

Options for Integrated 90°/120º sector antenna
Optimized for frequency re-use (>35 dB F/B), high gain, null fill and predictable performance, or Integrated 10° sector antenna for highly directional sectors.

Increase Throughput
Now capable of up to 300 Mbps per sector in a 40 MHz channel.

C050045A002B Datasheet

Interface

MAC (Media Access Control) Layer	Cambium Networks proprietary
Physical Layer	2×2 MIMO OFDM
Ethernet Interface	100/1000BaseT, full duplex, rate auto negotiated (802.3 compliant)
Protocols Used	IPv4, IPv6, UDP, TCP/IP, ICMP, Telnet, SNMP, HTTP, FTP
Network Management	IPv4/IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and v3, Cambium Networks cnMaestroTM
MTU	1700 bytes
VLAN	802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID

Performance

Subscriber Per Sector	Up to 238 – *Lite models limited to 20 Subscribers, License Key (C000045K010A) available to remove this limit
ARQ	Yes
Modulation Levels (Adaptive)	2x, 4x, 6x, 8x
MCS	QPSK, 16QAM, 64QAM, 256QAM
Signal to Noise Required (SNR, in dB)	10, 17, 24, 32
Maximum Deployment Range	Up to 40 miles (64 km
Latency	3 – 5 ms, typical
GPS Synchronization	Yes, via Autosync (CMM5 or UGPS)

Link Budget

Integrated Sector Antenna	90° Azimuth (3dB rolloff), 120° Azimuth (6dB rolloff) 8° Elevation (3dB rolloff), 2° Electrical Downtilt, Dual polarity, or 10° Azimuth, 10° Elevation (3dB rolloff), Dual polarity
Antenna Gain	17 dBi ± 1 dBi integrated 90/120° sector, 23 dBi ± 1 dBi integrated 10° sector
Maximum Transmit Power	+28 dBm (MIMO, Combined H+V) (+25 dBm for 3 GHz) (may be limited by regulations)
Maximum EIRP	+43 dBm combined output (may be limited by regulations)
VSWR	1.5, Reflection Coefficient 0.2, Reflected Power 4%, Return Loss 14 dB
Power Control	ATPC (Automatic Transmit Power Control) at system level, all Subscribers implement ATPC

Physical

Antenna Connection	3 GHz & 5GHz 50 ohm, N-Type (Connectorized version only
Surge Suppression (LPU fitted)	EN61000-4-5: 1.2us/50us, 500V voltage waveform Recommended external surge suppressor: Cambium Networks Model # C000000L033A
Mean Time Between Failure	>40 Years
Dust and Water Ingress Protection Rating	IP67, IP66
Temperature / Humidity	-40°C to +75°C (-40°F to +167°F), 0-100% condensing
Weight	Connectorized: Approx. 2.0 kg (4.5 lbs) for 3Ghz and Approx. 2.0 kg (4.5 lbs) for 5Ghz Integrated: Approx. 7 kg (15.5 lbs) for 3Ghz and Approx. 6.3 kg (14 lbs) for 4Ghz
Wind Survival	322 km/h (200 mi/h)
Vibration	NEMA TS2 Section 2.1.9 and Section 2.2.3
Shock	NEMA TS2 Section 2.1.10 and Section 2.2.4
External Icing	NEMA 250-2003 Section 5.6
Dimensions (H x W xD)	Connectorized: 3Ghz: 26.0 x 13.4 x 6.4 cm (10.3” x 5.3” x 3.3”) 5Ghz: 26.0 x 13.4 x 6.4 cm (10.3” x 5.3” x 3.3”)90º Integrated: 3Ghz: 73.2 x 19.7 x 15 cm (28.8” x 7.8” x 5.9”) 5Ghz: 59.1 x 23.3 x 15.8 cm (23.3” x 6.2” x 5.8”)10º Integrated: 5Ghz: 31.0 x 31.0 x 6.4 cm (12” x 12” x 2.5”)
Power Consumption	15W typical, 18W max, Using Aux port PoE for another device will increase power draw