PMP 450i 900 MHz
- PMP 450i 900 MHz deeper frequency propagation for Cambium Networks PMP 450 platform
- Provides a reliable link for near and non-line-of-site (NLOS) deployments
- 100+ Mbps subscriber capacity in a 20 MHz channel
- Access point is now 802.3at compatible and includes an AUX port, while the Subscriber can re-use the 30 VDC power supplies common to the PMP 100 platform
- Kinh Doanh
Mr Minh:
- Kinh Doanh
Mr Luân:
- Kinh DoanhWhatsApp:
- Tư Vấn Giải PhápFacebook:
- Hỗ Trợ Đơn HàngSales Engineer:
- 0989 544 978Cambium 900 MHz PMP 450i Connectorized Fixed Wireless Subscriber Module
PMP 450i 900 MHz (C009045A001A) allows for deep frequency propagation that suits the needs of rural broadband deployments, SCADA and sensor data backhaul, and even video surveillance applications.
PMP 450 has been deployed in hundreds of networks in over 50 countries, with over five billion field hours of service. This platform offers a flexible, reliable wireless broadband solution to support the many fixed wireless applications of a network operator including: rural connectivity; 3G / 4G offload; video surveillance; leased line replacement; remote office connectivity; smart grid advanced metering infrastructure (AMI), border patrol; primary or redundant connectivity; connectivity at special events; disaster recovery; and traffic monitoring and control.
C009045A001A Datasheet
| Channel Spacing | Configurable on 0.5 MHz increments |
|---|---|
| Frequency Range | 902 – 928 MHz |
| Channel Width | 5 MHz, 7 MHz, 10 MHz, 15 MHz or 20 MHz |
| Physical Layer | 2×2 MIMO OFDM |
|---|---|
| Ethernet Interfaced | 100/1000BaseT, full duplex, rate auto negotiated, 802.3 compliant (SM is 10/100BaseT only) |
| Protocols Used | IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP |
| Subscribers Per Sector | 238 |
|---|---|
| Maximum Deployment Range | Up to 120 miles (190 km) |
| GPS Synchronization | Yes, via Autosync (CMM4 or UGPS) |
| Encryption | 56-bit DES, FIPS-197 128-bit AES |
|---|
| Environmental | AP: IP 66, 67 SM: IP55 |
|---|---|
| Weight | Access Point: 1.8 kg (4 lbs.) Subscriber Module: 0.45 kg (1 lb.) |
| Dimensions (h x w x d) | Access Point: 26 x 13.4 x 6.4 cm (10.3” x 5.3” x 3.3”) Subscriber Module: 30 x 9 x 5 cm (11” x 3.5” x 2”) |
There are no reviews yet.