ePMP 3000
- ePMP 3000 High-performance, scalable and reliable access points for fixed wireless broadband
- ePMP 3000 features MU-MIMO for up to 1.2 Gbps capacity for more than 120 Subscribers
- Low TCO with three-year hardware warranty
- Interoperable with all Force 300 Subscriber Modules and supports backward compatibility to Force
Zalo:
- Kinh Doanh OnlineWhatsApp:
- Tư Vấn Giải PhápFacebook:
- Hỗ Trợ Đơn HàngSales Engineer:
- 0989 544 978Cambium ePMP™ 3000 Series
Cambium Networks’ ePMP™ product line has set the standard for high performance, scalability and reliability in harsh interference environments all at a compelling price. The ePMP 3000 is the third generation access point (AP) that carries on the interference tolerance mechanisms from ePMP 2000 but adds the power of Multi-User MIMO (MU-MIMO). The ePMP 3000 is a 4×4 MU-MIMO access point that can double the throughput at the sector level with the same channel bandwidth by serving two subscribers at the same time.
Cambium Networks’ ePMP product line has set the standard for high performance, scalability and reliability in harsh interference environments, all at a compelling price. The ePMP 3000 Access Point series is the third generation based on 802.11ac Wave 2 techology. ePMP 3000 Access Points interoperate with Force 300 Subscriber Modules (SM) and supports backward compatiblity. ePMP 3000 Access Points can deliver up to 600 Mbps aggregate to each Force 300 SM. A sophisticated scheduling and QoS engine combined with TDD synchronization allows the ePMP 3000 and 3000L to deliver consistently high-quality service plans to a large number of end users. All ePMP 3000 Access Points are managed with cnMaestro™, and networks can be planned with LINKPlanner. Both are available from Cambium Networks at no charge. ePMP 3000 The flagship product is the ePMP 3000, which can deliver 1.2 Gbps serving 120 or more subscribers. Featuring 4×4 MU-MIMO and dual overlapping sectors, the ePMP 3000 can transmit to two SM’s at the same time. This effectively doubles the capacity of 2×2 systems and
in the process, increases link budgets by 3 dB with downlink beamsteering. The ePMP 3000 can be fitted with either a 90º MU-MIMO sector or a 60º MU-MIMO horn antenna. An optional smart uplink beamsteering antenna can be added for additional uplink isolation. For additional interference mitigation, the ePMP 3000 supports dynamic filtering for neighboring channel interference. With TDD synchronization, ePMP 3000 networks can scale to thousands of end users leveraging a small number of channels. ePMP 3000L The ePMP 3000L is a 2×2 MIMO Access Point that delivers up to 600 Mbps to as many as 64 end users. The ePMP 3000L supports GPS synchronization for mitigating self-interference and increasing subscriber density. The ePMP 3000L can be deployed with either the 90º MIMO sector antenna or any third-party 2×2 horn, dish or sector antenna. ePMP 3000 MicroPOP The ePMP 3000 MicroPOP can be deployed as a complement to the ePMP 3000 or ePMP 3000L for low-density, short-range applications as a hole filler or to inject capacity in a small area. The MicroPOP has an integrated omni antenna but does not support synchronization.
C050910A001A Datasheet
| Model / part number | The full table of models and part numbers can be found in the table below |
| Frequency range | 4910-5980 MHz (exact frequencies permitted by local regulations) |
| Channel width | 20 | 40 | 80 MHz |
| Channel spacing | Configurable in 5 MHz steps |
| Interface | |
| MAC layer (Media Access Control) | Ownership of Cambium |
| Physical layer | 4X4 MUMIMO / OFDM |
| Ethernet interface | 100 / 1000BaseT, automatically negotiated speed, 802.3at compliant, Aux port SFP |
| Supported power supply methods | 56 V PoE (included), standard 802.3at PoE or CMM5 power supply with 56 V and 5 pin to 7 pin adapter |
| Protocols used | IPv4 / IPV6, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping |
| Network management | HTTPs, SNMPv2c, SSH |
| VLAN | 802.1Q with priority 802.1p |
| Performance | |
| Number of customers per sector | Up to 120 |
| ARQ | Yes |
| Nominal reception sensitivity (w / FEC) at 20 MHz channel | MCS 0, -92 MCS 8 supported by Wi-Fi -68 |
| Nominal reception sensitivity (w / FEC) at 40 MHz channel | MCS0, -89 MCS9, -64 |
| Nominal reception sensitivity (w / FEC) at 80 MHz channel | MCS0, -86, MCS9 – 61 |
| Modulation levels (adaptive) | MCS0 (BPSK) to MCS 9 (256 QAM 5/6) |
| GPS synchronization | Yes, via internal GPS or Cambium Sync (the internal GPS receiver also includes an antenna ) |
| QOS | Three-level (voice, high, low) with packet classification by DSCP, COS, VLAN ID, IP and MAC address |
| DSO | Dynamic spectrum optimization. Possibility to change channels based on the detection of interference on the current channel |
| Fast DFS | Changes to a free radar channel with an alternative background availability check |
| Link | |
| Antenna | Sectoral antenna available (C050910D301A) |
| Transmission power range | 0 to +32 dBm (total, up to regional EIRP limit) (step2 dB) |
| Physical Features | |
| Sectoral antenna connection | 4 x 50 ohms, RP (reverse polarity) SMA |
| Combination of beam-forming antenna | 2 x 50 ohms, RP (reverse polarity) SMA, DC (power antenna) |
| GPS antenna connection | 1 x 50 ohms, RP (reverse polarity) SMA |
| Surge suppression | Integrated 1 joule. C00000000L033A – Gigabit 56V surge suppressor is recommended for optimal surge protection |
| leakage class | IP55 |
| Temperature | From -30 ° C to + 55 ° C (from -22 ° F to + 131 ° F) |
| Energy consumption | 25 W Maximum 1 |
| Input voltage | 44 V to 59 V. |
| Weight | 0.7 kg (1.5 lbs) without supports |
| Dimensions (L x W x H) | 22.2 x 12.4 x 4.5 cm (8.75 x 4.9 x 1.75 inch) without supports |
| Other | |
| Encryption | 128 bit AES (CCMP mode) |
| Certified documents | |
| FCC Identifier | Z8H-89FT0024** |
| Industrial Certificate | 109W-0024** |
| Available Device Versions | |
| C058910A102A | ePMP 3000 5 GHz Access Point Radio (FCC) (US cord) |
| C050910A104A | ePMP 3000 5 GHz Access Point Radio (IC) (Canada/US cord) |
| C050910A203A | ePMP 3000 5 GHz Access Point Radio (EU) (EU cord) |
| C050910A303A | ePMP 3000 5 GHz Access Point Radio (EU) (UK cord) |
| C050910A001A | ePMP 3000 5 GHz Access Point Radio (ROW) (no cord) |
| C050910A101A | ePMP 3000 5 GHz Access Point Radio (ROW) (US cord) |
| C050910A201A | ePMP 3000 5 GHz Access Point Radio (ROW) (EU cord) |
| C050910A301A | ePMP 3000 5 GHz Access Point Radio (ROW) (UK cord) |
| C050910A401A | ePMP 3000 5 GHz Access Point Radio (ROW) (India cord) |
| C050910A402A | ePMP 3000 5GHz Access Point Radio (India) (India Cord) |
| C050910A501A | ePMP 3000 5 GHz Access Point Radio (ROW) (China cord) |
| C050910A601A | ePMP 3000 5 GHz Access Point Radio (ROW) (Brazil cord) |
| C050910A701A | ePMP 3000 5 GHz Access Point Radio (ROW) (Argentina cord) |
| C050910A801A | ePMP 3000 5 GHz Access Point Radio (ROW) (ANZ cord) |
| C050910A901A | ePMP 3000 5 GHz Access Point Radio (ROW) (South Africa cord) |
| C050910AZ01A | ePMP 3000 5 GHz Access Point Radio (ROW) (No PSU) |
| C050910D301A | EPMP 4×4 MU-MIMO Sector Antenna (for ePMP3000AP) |
There are no reviews yet.