C1an

Add to wishlistAdded to wishlistRemoved from wishlist 0

• Patented signal processing for improved radio performance in LOS and NLOS conditions
• Supports multiple isolated end-users through per client/VAP bandwidth control
• Per-end-user remote web-based management and client association status
• High-performance antennas with ±45°cross-polarized patch antennas – optimizing performance when operating in conjunction with Altai A8n series antennas
• Operates both as a CPE and as a small WiFi access point for local coverage
• Integrated 8-level LED alignment mechanism for fast, simple and best performing installation
• Weatherproof case (IP55 compliant) for enabling out-of-the-box outdoor installation
• The C1an operates in the 5Ghz band
Fi channel

SKU: SD.C1-AN00-UK/US/EU Category: Tags: , , Thương hiệu:

Ms Nhan: - Kinh Doanh
Mr Minh: - Kinh Doanh
Mr Luân: - Kinh Doanh
WhatsApp: - Tư Vấn Giải Pháp
Facebook: - Hỗ Trợ Đơn Hàng
Sales Engineer: - 0989 544 978

×



    Gửi Báo Giá Hotline: 0933 719 613

    Altai C1an Super WiFi CPE/AP
    The Altai C1an WiFi CPE/AP is designed as an essential component in the Altai Super WiFi system to extend outdoor Wi-Fi coverage into indoor areas for broadband connectivity in 5 GHz band or use as an AP for pico coverage.

    Altai C1an-Catalog

    The Altai C1an employs patented smart signal processing algorithms and antenna design to increase Wi-Fi signal strength (transmit and receive) by as much as 18 dB in areas covered by an A8n Super WiFi Base Station or A2 WiFi Access Point. It can be installed exactly where the throughput is required to boost up, and it allows the service operator to increase the coverage range of an A8n base station substantially and provides greater flexibility and cost savings to Wi-Fi deployments.

    Thông số kết nối Super WiFi Altai C1an kết nối vô tuyến

    Control Traffic Throughput Flexibly
    From day one, the C1an is designed and purpose-built for carriers. Its built-in traffic shaping based bandwidth control mechanism allows the control of uplink and downlink traffic throughput on a per-client or per-VAP basis. A full set of networking and management features are available to meet carriers’ requirements.

    Super WiFi Công Nghiệp Altai C1an

    Altai C1an for Wireless Broadband
    The C1an is a key component in wireless broadband access provisioning. It can be installed outdoor by the side of a window, mounted to a wall, at the rooftop of a building or placed at the desktop inside for fixed broadband access provisioning.

    Altai C1an for Access Point
    The C1an can also be used as a standalone Wi-Fi access point for smaller networks operating at 5 GHz with fast Ethernet backhaul. With its high gain built-in smart antenna, it is an important solution to complement the large coverage and high throughput of an A8n Base Station and A2 Access Point to improve Wi-Fi performance.

    Altai C1an for PTP Bridge
    The C1an is perfect for use as low-cost point-to-point bridge, in deployment scenarios such as commercial wireless broadband users or high definition surveillance cameras.

    Altai C1an Super WiFi CPE/AP - 802.11a/n Bandwidth Control and Remote Management Capable

    • Features built-in for carriers including per client/VAP based bandwidth control, remote web-based management and client association status
    • ±45° dual slant patch antennas are optimized to match with the Altai A8n/A2 antennas. It provides 3 dB more gain as compared to other V/H polarized CPEs
    • High performance antenna with 20 dB front-to-back ratio, which is on average 5 dB better than others in directional transmission without picking up unwanted signal
    • One-piece weatherproof chassis compliant to IP55 standard for direct outdoor installation
    • 8-level LED for easy alignment in the strongest signal direction
    • Increase signal strength for both NLOS and LOS coverage areas
    • Improve data transmission rate and throughput utilization of base station

    Super WiFi Altai C1an Datasheet

    Wireless Interface
    802.11a/n (2×2) Radio
    • Operating Mode: AP/CPE/Bridge/Repeater
    • Standard: IEEE 802.11a/n
    • Operating Frequency:
    5.150 – 5.350 GHz 5.470 – 5.725 GHz 5.725 – 5.850 GHz
    • Transmit Power: 29 dBm (Max.) 26 dBm (Per Chain)
    • Receiver Sensitivity:
    802.11a 54 Mbps -83 dBm 6 Mbps -96 dBm 802.11n HT20 -95 dBm HT40 -91 dBm
    • 16 SSID
    • WMM, 802.11h, 802.11k, 802.11r, 802.11v, 802.11w
    • Passpoint (Release 2)
    • Fast Roaming
    • Auto Channel Selection and TX Power Control
    • Bandwidth Control Per SSID/Client
    • Altai AirFi™ Throughput Optimization
    • 1+ N Redundancy
    • Multi-AP Steering*

    Antenna
    • Built-in 5 GHz Antenna 14 dBi Dual Slant ±45° Sector
    • Horizontal Beamwidth 35 – 45° (-3 dB)
    • Vertical Beamwidth 15 – 20° (-3 dB)
    • Front-to-back Ratio -20 dB (Max.)

    Networking
    • Switch (Bridge) and Gateway Mode
    • IPv4/IPv6 Dual-Stack
    • NAT
    • DHCP Client/Server
    • PPPoE Client
    • Soft-GRE
    • VLAN
    • Multicast Rate Filter/IGMP Snooping

    Security
    • Authentication – Open, Shared key, WPA/WPA-PSK, WPA2/ WPA2-PSK, WPA3*, 802.1x (EAP-PEAP/TLS/TTLS/SIM/AKA)
    • Encryption – WEP, TKIP, AES
    • Inter/Intra-SSID Client Isolation
    • MAC-based Access Control (White/Black List)
    • RADIUS/Active directory
    • Dynamic VLAN Assignment
    • Firewall
    • WIDS/WIPS
    • Broadcast/Multicast/Unicast Flooding Control

    Management
    • Management Platforms: AltaiGate, AltaiCare, AtlaiCare Appliance
    • Web User Interface
    • Command Line Interface (SSH)
    • Remote Factory Reset
    • Trusted Management IP List
    • SNMP v1/v2c/v3
    • MIB2/IF-MIB/Altai Enterprise MIB
    • Syslog
    • Spectral Analysis*
    • KPI Monitoring*
    • Client OS and Hostname Detection

    Physical Specifications
    • Dimension: 242 x 80 x 27 mm (Without Mounting Kit)
    • Weight: 0.4 kg
    • Mounting Desktop, Pole, Wall or Window-Mounted
    • Network Interface 10/100 Mbps Ethernet Port
    • LED Display: |
    Main Power Status Ethernet Status 8-Level Signal Strength (User Configurable)

    Power Supply
    • Power Supply: 18V Passive PoE PD or 802.3af PoE PD via Adapter
    • Power Consumption: 6 W (Typical)/8 W (Max.)

    Environmental Specifications
    • Operating Temperature: -20 °C to +55 °C
    • Storage Temperature: -40 °C to +80 °C
    • Humidity: Up to 95% (Non-Condensing)
    • Wind Loading Up to 200 km/h (124 mph)
    • Weatherproof Outdoor UV Stabilized Plastic IP55 Compliant

    Antenna Pattern (Built-in Antennas)

    C1an

    Certifications
    • FCC/CE/Others*
    • RoHS Compliance

    Product Ordering Information
    C1an (Part No.: SD.C1-AN00-UK/US/EU)
    Standard Package
    • C1an Super WiFi CPE/AP with Built-in 5 GHz Patch Antennas (Model No.: WA1011N-A)
    • DC Injector and AC Adapter (UK, US, or EU)
    • Cable Tie
    Optional Accessories
    • 802.3af to Passive PoE Adapter
    Contact Us:
    Email: luan@phuyenxanh.vn

    0/5 (0 Reviews)

    1 review for C1an

    4.0 out of 5
    0
    1
    0
    0
    0
    Write a review
    Show all Most Helpful Highest Rating Lowest Rating
    1. phuyenxanh

      Chuyên cho kết nối Camera tầm xa

      Helpful(0) Unhelpful(0)You have already voted this

      Add a review

      Phú Yên Xanh Store
      Logo
      Shopping cart