AIR-WAP640
- AIR-WAP640 support 802.11ax Wi-Fi 6 wireless in-wall access point
- Wired and wireless gigabit access
- Easy to deploy x86 standard panel
- Downlink Port
- Good PoE compatibility
- Multi-mode: fit, fat, bridge
Ms Nhan:
- Kinh Doanh
Mr Minh: - Kinh Doanh
Mr Luân: - Kinh Doanh
WhatsApp: - Tư Vấn Giải Pháp
Facebook: - Hỗ Trợ Đơn Hàng
Sales Engineer: - 0989 544 978
Hotline: 0933 719 613
- Kinh Doanh
Mr Minh:
- Kinh Doanh
Mr Luân:
- Kinh DoanhWhatsApp:
- Tư Vấn Giải PhápFacebook:
- Hỗ Trợ Đơn HàngSales Engineer:
- 0989 544 978×
AirPro AIR-WAP640 11ax 1800Mbps Inwall Wireless Access Point
AIR-WAP640 is an 11ax Wi-Fi standard high performance in wall wireless access point with multiple ports and support MU-MIMO, Wave2.0, OFDMA and Seamless Roaming.
Combined 1800Mbps Wi-Fi speed over 2 radios: 2.4GHz (600Mbps 11ax 2*2) + 5GHz (1200Mbps 2*2), equipped Gigabit WAN & LAN ports, support MU-MIMO and DL/UL-OFDMA modulation, faster Ethernet data rate and more users, then multiple users can upload or download multiple packets at same time, narrower subcarrier spacing and longer symbol time, improved the stability and data processing efficiency, publicly to be used in high density access environment such as university campus, concert venue, gymnasium, etc.
KEY FEATURES AND HIGHLIGHTS
- Wireless data rate up to 1.8Gbps. 802.11ax support 1024QAM, long OFDM symbol, 160M bandwidth and 11ax 2×2 MIMO technology, the wireless data rate up to 1.8Gbps, meet with demand of high-speed applications such as VR/ AR, 4K or 8K stream media.
- AIR-WAP640 support DL/ UL MU-MIMO. 802.11ax support both downlink MU-MIMO and uplink MU-MIMO. It can communicate with multiple end users at the same time, greatly improving the user’s uplink transmission rate and the system’s uplink and downlink capacity, improving the efficiency of multi-user concurrent scenarios, reducing the terminal application latency.
- Improvement of Anti-Interference Ability. 802.11ax support BSS color bit and dynamic CCA-SD (Clear Channel Assessment Signal Detection) threshold and power adjustment, effectively alleviates the channel interference in multi-users scenarios, improve the utilization of spectrum resources.
- TWT (Target Wake-up Time). 802.11ax support TWT, allowing devices to negotiate when need to wake up, send and receive data. In additional, wireless AP can group the device into different TWT cycles, increase sleep time, reduce the device competing after wake-up, and save the device power.
- Coverage Improvement. 802.11ax support long OFDM symbol transmission mechanism and 2MHz narrowband transmission, effectively reduced the packet loss rate and noise interference, improve the receive sensitivity and increase the Wi-Fi coverage.
AIR-WAP640 Datasheet
| Model | AIR-WAP640 |
|---|---|
| Standard | 802.11ax/ac/b/g/n |
| Flash | SPI NOR 16MB |
| Memory | 128MB |
| 2.4G Frequency | 2.4GHz – 2.484GHz |
| 2.4G Wi-Fi standard | 802.11b/g/n/ac/ax |
| 5.8G Frequency | 5150~5850MHz |
| 5.8G Wi-Fi Standard | 802.11 a/n/ac/ax |
| Interface | 1 * 10/100 /1000 RJ45 WAN Port 4 * 10/100 /1000 RJ45 LAN Ports (Optional: 3*10/ 100/ 1000 RJ45 LAN, 1* Rj11) 1 * Reset button, press 10 seconds to revert to default setting |
| Antenna | 2.4G: 2dBi; 5G: 4dBi |
| Data Rate | 1800Mbps |
| End Users | 120+ |
| RF Power | 2.4G≤20dBm; 5.8G≤19dBm |
| PoE | 48V (IEEE 802.3af/at) |
| LED light | Sys |
| Power Consumption | ≤ 14W |
| ESD | ±6KV |
| Size | 86mmX86mmX45mm |
| Working Mode | Gateway, AP |
| Wireless Functions | Multiple SSID functions: 2.4GHz: 4; 5.8GHz: 4. Support SSID hidden Support seamless roaming, 802.11kvr standard. Support 5G Prior for a faster Ethernet. Wireless Security: Open, WPA, WPA2PSK_TKIPAES, WAP2_EAP, Support MAC filter Support Wi-Fi time on/off to save energy Support client isolation to improve the wireless stability Support RF power adjustable, adjust the RF power based on environment. Support user quantity limited, Max 64 users to access each band. |
| Networking Function | VLAN settings Bridge / NAT mode |
| Device Management | Back-up the configuration Restore the configuration Reset to factory default Reboot the device: including time reboot or reboot immediately Admin management password modify Firmware upgrade System log Support firmware GUI web management, AC controller management, Remote or Local |
| Protocols | Ipv4 |
| Frequency Range | 2.4-2.5GHz |
| Impedance | 50 Ohms nominal |
| Gain | 2dBi |
| Radiation | Omni |
| Polarization | Linear |
| Return | Loss/VSWR |
There are no reviews yet.