Air-AP690IX (ODU)
- Air-AP690IX (ODU) support 1.75 Gbps Dual Band 11AX High Power Wi-Fi6 Outdoor AP with 575Mbps on 2.4Ghz & 1.2Gbps on 5Ghz
- 1 WAN*100/1000 PoE/1*SFP Port / 1Console Port
- 12V DC/1.5Amp Or at PoE
- 575Mbps on 2.4Ghz and 1.2Gbps on 5Ghz
- Radio Chain Streams: 3×3
- Antenna Gain: 10dbi Internal Panel Antenna
- Kinh Doanh
Mr Minh:
- Kinh Doanh
Mr Luân:
- Kinh DoanhWhatsApp:
- Tư Vấn Giải PhápFacebook:
- Hỗ Trợ Đơn HàngSales Engineer:
- 0989 544 978AirPro Air-AP690IX (ODU) support 1.75 Gbps Dual Band 11AX High Power Wi-Fi6 Outdoor AP
AirPro AP690IX(ODU) is high performance outdoor wireless access point which can support 2.4 GHz and 5 GHz band, adopting technologies such as Multi-User Multiple-Input MultipleOutput (MU-MIMO) and orthogonal frequency division multiplexing (OFDM), providing a data transmission rate of at most 575 Mbps in 2.4GHz band and 1200Mbps in 5GHz band. It supportsup to 254 concurrent users. With integrated antenna inside, AP690IX (ODU) is widely used at outdoor WIFI coverage networks, such as campus, streets, rural area, resorts and scenic spots.
KEY FEATURES AND HIGHLIGHTS
High-level outdoor 802.1ax wireless access:
The AP690IX(ODU) supports the 802.11ax standard and can operate in 2.4 GHz and 5 GHz both bands. It provides an access bandwidth up to 1.775Gbps, which can connect users up to 254 simultaneously.
Fiber uplink for long-distance connection:
Fiber port used as uplink ports, which break through the limitations of the conventional copper port, the distance is no longer a bottleneck.
Operating in a wide temperature range:
Thanks to deliberate hardware design and the selection of dedicated components it can operate in a broad temperature range from -40°C to 65°C.
Highest IP68 Anti-dust & water standard:
AP690IX (ODU) comply IP68 can be deployed in the harshest outdoor environment.
Multiple antenna options:
AAP690IX (ODU) supports external antennal (omnidirectional, directional), the customer can make use accordingly.
Good PoE compatibility:
AP690IX (ODU) can work well with the third-party PoE switches that support 802.3at standard.
High-performance RF:
The professional optimized design is employed for the RF module of the AP690IX (ODU), integrated directional antenna supports 27 dB transmission power which can greatly improve wireless coverage.
Cloud management:
AP690IX (ODU) can operate with the AirPro cloud platform seamless to provide a better cost-performance solution.
Dual-mode fit & fat:
AP690IX (ODU) can work in fit or fat mode and can flexibly switch between the fit mode and the fat mode according to network planning requirements.
AP690IX (ODU) Datasheet
| Model | AP690IX (ODU) |
|---|---|
| Dimensions(L*W*D) (mm) | 245 × 200 × 90 |
| Working Frequency | 2.4G : 802.11b/g/n/ax 5G : 802.11a/n/ac/ax |
| Maximum Data Rate | 2.4G : 575Mbps 5G : 1200Mbps |
| Physical Port | 1 * 10/100/1000Base-T PoE port for uplink 1 * 1000M SFP fiber port |
| PoE | 802.3at |
| Maximum power consumption | < 23.4W |
| Antenna | Internal Antenna 2.4G 10dBi, 5G 10dBi |
| Working frequency band | 802.11a/n/ac: 5.150 GHz to 5.850 GHz 802.11b/g/n/ax: 2.4 GHz to 2.483 GHz 802.11a/n/ac/ax: 5.150 ~ 5.350GHz 5.47 ~ 5.725GHz 5.725 ~ 5.850GHz |
| Modulation technology | 11b : DSS: CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps 11a/g : OFDM:64QAM@48/54Mbps,16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps 11n : MIMO-OFDM: BPSK, QPSK,16QAM,64QAM 11ac : MIMO-OFDM: BPSK, QPSK,16QAM,64QAM,256QAM 11ax : MIMO-OFDMA: BPSK, QPSK,16QAM,64QAM,256QAM,1024QAM |
| Transmit power | 2.4G: 27dBm 5G : 27dBm (Note : final output power comply with deployment regulation might be different) |
| Power adjustment granularity | 1 dBm |
| Working/Storage temperature | –40°C to + 65°C –45°C to + 80°C |
| Working/Storage RH | 5% to 95% (non-condensing) |
| Protection level | Ip68 |
| WLAN | Product positioning: Outdoor dual-frequency Working frequency band: 2.4GHz and 5GHz Bandwidth performance: 1775Mbps Virtual AP (BSSID): 32 Concurrent user: 254 Number of spatial streams: 2.4GHz:2, 5GHz:2 Dynamic channel adjustment (DCA): Yes Transmit power control (TPC): Yes Blind area detection and repair: Yes SSID hiding: Yes RTS/CTS: Yes RF environment scanning: Yes Hybrid acces:s Yes Restriction on the number of access users: Yes Link integrity check: Yes Accessing control of terminals based on signal strength: Yes Forcing terminals to roam based on signal strength: Yes Intelligent control of terminals based on airtime fairness: Yes High-density application optimization: Yes |
| 802.11ax enhancements | Space streams 2.4GHz:2, 5GHz:2 Frequency band 2.4GHz + 5GHz 80 MHz bundling Yes 1200Mbp（s PHY） Yes Frame aggregation (A-MPDU) Yes Frame aggregation (A-MSDU) Yes Maximum likelihood demodulation (MLD) Yes Transmit beamforming (TxBF) Yes Maximum ratio combining (MRC) Yes Space-time block coding (STBC) Yes Low-density parity-check code (LDPC) Yes |
| Security | Encryption 64/128 WEP, TKIP, and CCMP encryption 802.11i: Yes Portal authentication: Yes WAPI: Yes MAC address authentication: Yes LDAP authentication Yes PEAP authentication Yes WIDS/WIPS: Yes Protection against DoS attacks: Anti-DoS for wireless management packets Forwarding security: Frame filtering, white list, static blacklist, and dynamic blacklist User isolation: AP L2 forwarding suppression; Isolation between client Periodic SSID enabling and disabling: Yes Access control of free resources: Yes Wireless SAVI: Yes ACL: Access control of various data packets such as MAC, IPv4, and IPv6 packets Secure access control of APs: Secure access control of APs, such as MAC authentication, password authentication, or digital certificate authentication between an AP and an AC 802.11W: Yes, encryption of management frames |
| Forwarding | IP address setting: Static IP address configuration or dynamic DHCP address allocation IPv6 forwarding: Yes IPv6 portal: Yes Local forwarding: Yes Multicast: IGMP snooping Roaming: Yes AP switching reference: Signal strength, bit error rate, RSSI, S/N, whether neighboring APs are normally operating, etc. WDS: Yes |
| QoS | WMM: Yes Priority mapping: Ethernet port 802.1P identification and marking; Mapping from wireless priorities to wired priorities QoS policy mapping: Mapping of different SSIDs/VLANs to different QoS policies; Mapping of data streams that match with different packet fields to different QoS policies; L2-L4 packet filtering and flow classification Yes: MAC, IPv4, and IPv6 packets Load balancing: Load balancing based on the number of users; Load balancing based on user traffic; Load balancing based on frequency bands Bandwidth limit: Bandwidth limit based on Aps; Bandwidth limit based on SSIDs; Bandwidth limit based on terminals; Bandwidth limit based on specific data streams Call admission control (CAC): CAC based on the number of users Power saving mode: Yes Automatic emergency mechanism of APs: Yes Intelligent identification of terminals: Yes Multicast enhancement: Multicast to unicast |
| Management | Network management: Centralized management through an AC; both fit and fat modes Maintenance mode: Both local and remote maintenance Log function: Local logs, Syslog, and log file export Alarm: Yes Fault detection: Yes Statistics: Yes Switching between the fat and fit modes: An AP working in fit mode can switch to the at mode through a wireless AC; An AP working in fat mode can switch to the fit mode through a local control port or Telnet. Remote probe analysis: Yes Watchdog: Yes |
| Value added service | Value added marketing: Support: various apps based on intelligent terminals, advertising push based on location, personalized push of portals Value added authentication: WeChat, SMS, QR code Passenger flow analysis: Yes |
There are no reviews yet.