AIR-AP605C-AX-R2
- AIR-AP605C-AX-R2 Enterprise-class indoor 802.11ax Wi-Fi 6 wireless access point.
- Wireless user management at a fine granularity.
- Flexible installation.
- PoE compatibility
- Dual-mode fit & fat
- Kinh Doanh
Mr Minh:
- Kinh Doanh
Mr Luân:
- Kinh DoanhWhatsApp:
- Tư Vấn Giải PhápFacebook:
- Hỗ Trợ Đơn HàngSales Engineer:
- 0989 544 978AirPro AIR-AP605C-AX-R2 support 3Gbps WiFi6 High Power Ceiling Access Point
AIR-AP605C-AX-R2 is a dual-band high-performance gigabit wireless access point device based on the 802.11ax standard launched by AirPro, it could offer maximum 3000Mbps access rate. AIR-AP605C works in the 2.4GHz and 5GHz frequency bands and supports advanced wireless technologies such as MU-MIMO, OFDMA, spaal mulplexing, and TWT. The first radio of AP605C works in the 2.4GHz frequency band and can provide a maximum access rate of 575Mbps; the second radio works in the 5GHz frequency band and can provide a maximum access rate of up to 2400Mbps.
Enterprise-class indoor 802.11ax Wi-Fi 6 wireless access point:
AIR-AP605C-AX-R2 supports the 802.11ax standard, operates in both 2.4 GHz and 5 GHz band, and provides an access bandwidth up to 3000Mbps. This model is the best choice for Entry-level office or company as it can support concurrent users up to 254.
Wireless user management at a fine granularity:
AIR-AP605C-AX-R2 can support a maximum of 32 WLANs to implement mul-layer mul-service management of wireless users at a fine granularity. Each WLAN supports access control and uplink/downlink rate limit based on MAC or IP addresses. These WLANs may be bound to virtual local area networks (VLANs).
Flexible installaon:
AIR-AP605C-AX-R2 supports wall mounng, ceiling mounng, T-keel mounng, you can deploy it almost everywhere that you want.
PoE compability:
AIR-AP605C-AX-R2 can work well with all PoE switch (AirPro, Cisco, Huawei, Juniper, etc.) which support 802.3af & at standard, this allows to power up AIRAP605C-AX directly, a power adapter is not required anymore.
Dual-mode fit & fat:
AIR-AP605C-AX-R2 can work in fit or fat mode and can flexibly switch between the fit mode and the fat mode according to network planning requirements.
AIR-AP605C-AX-R2 Datasheet
| Model | AIR-AP605C-AX-R2 |
|---|---|
| Dimensions(L*W*D) (mm) | 247 x 153 x 30 |
| 10/100 /1000Base-T port | 2 |
| Console port (RJ-45) | 1 |
| USB 2.0 | 1 |
| Power supply | 802.3af & at and External power adapter (Input: 100〜240V AC , Output: 12 VDC) |
| Maximum power consumpon | <13W |
| RF port | Built-in 2.4 GHz 5 dBi antenna and 5 GHz 5 dBi antenna |
| Working frequency band | 802.11b/g/n/ax: 2.4 GHz to 2.483 GHz 802.11ac/ax: 5.150GHz to 5.250GHz 5.250GHz to 5.350GHz 5.725GHz to 5.850GHz |
| Modulaon technology | 11b : DSS: CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps 11a/g : OFDM:64QAM@48/54Mbps,16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps 11n : MIMO-OFDM: BPSK, QPSK,16QAM,64QAM 11ac : MIMO-OFDM: BPSK, QPSK,16QAM,64QAM,256QAM 11ax: MIMO-OFDMA: BPSK, QPSK,16QAM,64QAM,256QAM,1024QAM |
| Transmit power | 2.4G: 23dBm 5G : 23dBm (Note : final output power comply with deployment regulaon might be different) |
| Power adjustment granularity | 1 dBm |
| Working/Storage | –10°C to +55°C |
| Temperature | –40°C to +70°C |
| Working/Storage RH | 5% to 95% (non-condensing) |
| Protecon level | Ip41 |
| WLAN | Product posioning: Indoor dual-frequency Working frequency band: 2.4GHz and 5GHz Bandwidth performance: 3000Mbps Virtual AP (BSSID): 32 Concurrent user: 254 Number of spaal streams: 2.4GHz:2, 5GHz:2 |
| 802.11ax enhancements | Space streams: 2.4GHz:2, 5GHz:2 Frequency band: 2.4GHz + 5GHz 80 MHz bundling: Yes Encrypon: 64/128 WEP, TKIP, and CCMP encrypon |
| Security | Protecon against DoS aacks: An-DoS for wireless management packets Forwarding security: Frame filtering, white list, stac blacklist, and dynamic blacklist User isolaon: AP L2 forwarding suppression Isolaon between client ACL: Access control of various data packets such as MAC, IPv4, and IPv6 packets Secure access control of APs: Secure access control of APs, such as MAC authencaon, password authencaon, or digital cerficate authencaon between an AP and an AC |
| Forwarding | 802.11W: Yes, encrypon of management frames IP address setting: Stac IP address configuraon or dynamic DHCP address allocaon Mulcast: IGMP snooping AP switching reference: Signal strength, bit error rate, RSSI, S/N, whether neighboring APs are normally operang, etc. |
| QoS | QoS: Ethernet port 802.1P idenficaon and marking Mapping from wireless priories to wired priories QoS policy mapping: Mapping of different SSIDs/VLANs to different QoS policies Mapping of data streams that match with different packet fields to different QoS policies. L2-L4 packet filtering and flow classificaon: Yes: MAC, IPv4, and IPv6 packets. Load balancing: Load balancing based on the number of users, Load balancing based on user traffic, Load balancing based on frequency bands Bandwidth limit: Bandwidth limit based on APs, Bandwidth limit based on SSIDs, Bandwidth limit based on terminals, Bandwidth limit based on specific data streams Call admission control (CAC): CAC based on the number of users Mulcast enhancement: Mulcast to unicast |
| Management | Network management: Centralized management through an AC; both fit and fat modes Maintenance mode: Both local and remote maintenance Log funcon: Local logs, Syslog, and log file export Switching between the fat and fit modes: An AP working in fit mode can switch to the, fat mode through a wireless AC;, An AP working in fat mode can switch to the fit mode through a local control port or Telnet. |
| Value added service | Value added marketing: Support: various apps based on intelligent, terminals, advertising push based on location, personalized push of portals Value added authentication: WeChat, SMS, QR code Passenger flow analysis: Yes |
AIR-AP605C-AX-R2 is ideal AP for indoor Wi-Fi coverage, with zero touch provisioning, advanced RF control and cost-effective design, it could offer best indoor Wi-Fi experience for customers.
There are no reviews yet.