AIR-AP520
- AIR-AP520 wireless data rate up to 1.8Gbps
- 1024-QAM Modulation Mode
- DL/UL MU-MIMO
- TWT (Target Wake-up Time)
- Coverage Improvement
- Improvement of Anti-Interference Ability
Mr Minh: - Kinh Doanh
Mr Luân: - Kinh Doanh
WhatsApp: - Tư Vấn Giải Pháp
Facebook: - Hỗ Trợ Đơn Hàng
Sales Engineer: - 0989 544 978
AirPro AIR-AP520 11ax 1800Mbps Celling Wireless Access Point
AIR-AP520 is an 11ax Wi-Fi standard MTK Chipset high power industrial Ceiling Wireless Access Point. It supports MU-MIMO, Wave2.0, OFDMA and Seamless Roaming.
Combined 1800Mbps Wi-Fi speed over 2 radios: 2.4GHz (600Mbps 11ax 2*2) and 5GHz (1200Mbps 2*2), equipped with Gigabit WAN & LAN ports, supports MU-MIMO and DL/UL- OFDMA modulaon, faster Ethernet data rate and more users, mulple users can upload or download mulple packets at same me, narrower subcarrier spacing and longer symbol me, improved the stability and data processing efficiency, can be used in high density access environment such as university campus, concert venue, gymnasium, etc.
Wireless data rate up to 1.8Gbps
802.11ax supports 1024QAM, long OFDM symbol, 160M bandwidth and 11ax 2×2 MIMO technology, wireless data rate up to 1.8Gbps, meets with demand of high-speed applicaons such as VR/AR, 4K or 8K stream media.
1024-QAM Modulaon Mode
802.11ax adopt 1024-QAM modulaon, which is more efficient than 802.11ac modulaon, throughput of single spaal traffic is increased by 25%.
DL/UL MU-MIMO
802.11ax support both downlink MU-MIMO and uplink MU-MIMO. It can communicate with mulple end users at the same me, greatly improving the user’s uplink transmission rate and the system’s uplink and downlink capacity, improving the efficiency of mul-user concurrent scenarios, reducing the terminal applicaon latency.
Coverage Improvement
802.11ax supports long OFDM symbol transmission mechanism and 2MHz narrowband transmission, effecvely reduces the packet loss rate and noise interference, improves the recepon sensivity and increases the Wi-Fi coverage.
TWT (Target Wake-up Time)
802.11ax support TWT, allowing devices to negoate when need to wake up, send and receive data. In addion, wireless AP can group the device into different TWT cycles, increase sleep me, reduce the device compeng aer wake-up, and save the device power.
Improvement of An-Interference Ability
802.11ax supports BSS color bit and dynamic CCA-SD (Clear Channel Assessment Signal Detecon) threshold and power adjustment, effecvely alleviates the channel interference in mul-users scenarios, improves the ulizaon of spectrum resources.
AIR-AP520 Datasheet
Model | AIR-AP520 |
---|---|
Chipset | MT7621AT+MT7905N+MT7975DN |
Standard | 802.11ax/ac/b/g/n |
Flash | SPI NOR 16MB |
Memory | 256MB |
2.4G Frequency | 2.4GHz-2.484GHz |
2.4G Wi-Fi standard | 802.11b/g/n/ac/ax |
5.8G Frequency | 5150~5850MHz |
5.8G Wi-Fi Standard | 802.11 a/n/ac/ax |
Interface | 1*10/100/1000 RJ45 WAN Port 1*10/100/1000 RJ45 LAN Port 1* Reset buon, press 10 seconds to revert to default seng |
Antenna | Build in 4dBi MIMO Antenna |
Data Rate | 1800Mbps |
End Users | 120+ |
RF Power | <20dBm |
DC | 12V—-1.5A |
PoE | 48V (IEEE 802.3af/at) |
LED light | Sys and Wi-Fi, WAN, LAN |
Power Consumpon | ≤ 15W |
Size | 168mmX168mmX32mm |
Working Mode | Gateway, AP |
Wireless Funcons | Mulple SSID funcons: 2.4GHz: 4; 5.8GHz: 4. Support SSID hidden Support seamless roaming, 802.11kvr standard. Support 5G Prior for a faster Ethernet. Wireless Security: Open, WPA, WPA2PSK_TKIPAES, WAP2_EAP, 802.1x Support MAC filter Support Wi-Fi me on/off to save energy Support client isolaon to improve the wireless stability Support RF power adjustable; adjust the RF power based on enviro |
Networking Funcon | VLAN sengs |
Device Management | Back-up the configuraon Restore the configuraon Reset to factory default Reboot the device: including me reboot or reboot immediately Admin management password modify Firmware upgrade System log Support firmware GUI web management, AC controller management, remote management and cloud management |
There are no reviews yet.