Giao hàng miễn phí tại Tp. Hồ Chí Minh 0936 858 024

Altai C1xan

Add to wishlistAdded to wishlistRemoved from wishlist 0

• Patented signal processing for improved radio performance in LOS and NLOS conditions
• Supports multiple isolated end-users through per client/VAP bandwidth control
• Per-end-user remote web-based management and client association status
• Optional high-performance external omni or sector antennas – optimizing performance when operating in conjunction with Altai A8n series antennas
• Operates both as a CPE and as a small WiFi access point for local coverage; it is also perfect for use as low cost point-to-point bridge
• Integrated 8-level LED alignment mechanism for fast, simple and best performing installation
• Weatherproof case (IP55 compliant) for enabling out-of-the-box outdoor installation
• The C1xan operates in the 5GHz band


Zalo: - Kinh Doanh Online
WhatsApp: - Tư Vấn Giải Pháp
Facebook: - Hỗ Trợ Đơn Hàng
Sales Engineer: - 0989 544 978

×



    Gửi Báo Giá Hotline: 0933 719 613

    Altai C1xan Super WiFi CPE/AP
    The Altai C1xan WiFi CPE/AP is designed as an essential component in the Altai Super WiFi system to extend outdoor Wi-Fi coverage into indoor areas for broadband connectivity in 5 GHz band or use as an AP for pico coverage.

    The Altai C1xan employs patented smart signal processing algorithms and antenna design to increase Wi-Fi signal strength (transmit and receive) by as much as 22 dB in areas covered by an A8n Super WiFi Base Station or A2 WiFi Access Point. It can be installed exactly where the throughput is required to boost up, and it allows the service operator to increase the coverage range of an A8n base station substantially and provides greater flexibility and cost savings to Wi-Fi deployments.

    Flexible External Antennas
    The Altai C1xan employed 2-external SMA antenna port design. It allows the user to choose the exact antenna gain and beamwidth as they need. Our standard antenna accessories include 5 GHz 9 dBi omni, 16 dBi 100º sector and 20 dBi panel antennas for standard AP, CPE and bridge applications. User can also equip with his own high gain antenna for longer range AP, CPE and bridge applications

    Thông số kết nối điểm cuối của Altai C1xan

    Control Traffic Throughput Flexibly
    From day one, the C1xan is designed and purpose-built for carriers. Its built-in traffic shaping based bandwidth control mechanism allows the control of uplink and downlink traffic throughput on a per-client or per-VAP basis. A full set of networking and management features are available to meet carriers’ requirements.

    Altai C1xan for Wireless Broadband
    The C1xan is a key component in wireless broadband access provisioning. It can be installed outdoor by the side of a window, mounted to a wall, at the rooftop of a building or placed at the desktop inside for fixed broadband access provisioning.

    Bộ phát sóng Wifi công nghiệp Super Altai C1xan

    Altai C1xan for Access Point
    The C1xan can be used as a standalone Wi-Fi access point for networks operating at 5 GHz with fast Ethernet backhaul. With its flexible external antennas, it suits for different scenarios to complement the large coverage and high throughput of an A8n Base Station and A2 Access Point to improve Wi-Fi performance.

    Altai C1xan for PTP Bridge
    The C1an is perfect for use as low cost point-to-point bridge, in deployment scenarios such as commercial wireless broadband users or high definition surveillance cameras.

    As an integral part of our Super WiFi network infrastructure, the Altai C1xn differentiates others with:

    • Features built-in for carriers including per client/VAP based bandwidth control, remote web-based management and client association status
    • External antenna ports design allows users to choose exactly the antenna gain and beamwidth they need
    • Low cost AP, CPE and bridge applications for outdoor and indoor areas
    • One-piece weatherproof chassis compliant to IP55 standard for direct outdoor installation
    • 8-level LED for easy alignment in the strongest signal direction
    • Increase signal strength for both NLOS and LOS coverage areas
    • Improve data transmission rate and throughput utilization of base station

    Altai C1xan Super WiFi CPE/AP - With External Antenna Port for Flexible Deployment Datasheet

    Wireless Interface
    802.11a/n (2×2) Radio
    • Operating Mode: AP/CPE/Bridge/Repeater
    • Standard: IEEE 802.11a/n
    • Operating Frequency: 5.150 – 5.350 GHz 5.470 – 5.725 GHz 5.725 – 5.850 GHz
    • Transmit Power: 29 dBm (Max.) 26 dBm (Per Chain)
    • Receiver Sensitivity:
    802.11a 54 Mbps -83 dBm 6 Mbps -96 dBm 802.11n HT20 -95 dBm HT40 -91 dBm
    • 16 SSID
    • WMM, 802.11h, 802.11k, 802.11r, 802.11v, 802.11w
    • Passpoint (Release 2)
    • Fast Roaming
    • Auto Channel Selection and TX Power Control
    • Bandwidth Control Per SSID/Client
    • Altai AirFi™ Throughput Optimization
    • 1+ N Redundancy
    • Multi-AP Steering*

    Antennas (Optional Accessories)
    • External Antenna:
    – 20 dBi Panel 16 dBi 100º (-6dB)
    – Sector 9 dBi Omni
    • Antenna Connector 2 x RP-SMA Female

    Networking
    • Switch (Bridge) and Gateway Mode
    • IPv4/IPv6 Dual-Stack
    • NAT
    • DHCP Client/Server
    • PPPoE Client
    • Soft-GRE
    • VLAN
    • Multicast Rate Filter/IGMP Snooping

    Security
    • Authentication – Open, Shared key, WPA/WPA-PSK, WPA2/ WPA2-PSK, WPA3*, 802.1x (EAP-PEAP/TLS/TTLS/SIM/AKA)
    • Encryption – WEP, TKIP, AES
    • Inter/Intra-SSDI Client Isolation
    • MAC-based Access Control (White/Black List)
    • RADIUS /Active directory
    • Dynamic VLAN Assignment
    • Firewall
    • WIDS/WIPS
    • Broadcast/Multicast/Unicast Flooding Control

    Management
    • Management Platforms: AltaiGate, AltaiCare, AtlaiCare Appliance
    • Web User Interface
    • Command Line Interface (SSH)
    • Remote Factory Reset
    • Trusted Management IP List
    • SNMP v1/v2c/v3
    • MIB2/IF-MIB/Altai Enterprise MIB
    • Syslog
    • Spectral Analysis*
    • KPI Monitoring*
    • Client OS and Hostname Detection

    Physical Specifications
    • Dimension: 280 x 80 x 27 mm (Without Mounting Kit)
    • Weight: 0.4 kg
    • Mounting Desktop, Pole, Wall or Window-Mounted
    • Network Interface: 10/100 Mbps Ethernet Port
    • LED Display:
    Main Power Status Ethernet Status 8-Level Signal Strength (User Configurable)

    Power Supply
    • Power Supply: 18V Passive PoE PD or 802.3af PoE PD via Adapter
    • Power Consumption: 6 W (Typical)/8 W (Max.)

    Environmental Specifications
    • Operating Temperature: -20 °C to +55 °C
    • Storage Temperature: -40 °C to +80 °C
    • Humidity: Up to 95% (Non-Condensing)
    • Wind Loading: Up to 200 km/h (124 mph)
    • Weatherproof Outdoor UV Stabilized Plastic IP55 Compliant

    Certifications
    • FCC/CE*/Others*
    • RoHS Compliance

    Product Ordering Information
    C1xan (Part No.: SD.C1-XAN0-UK/US/EU)
    Standard Package
    • C1xan Super WiFi CPE/AP with External Antennas Ports (Model No.: WA1011N-AX)
    • DC Injector and AC Adapter (UK, US, or EU)
    • Cable Ties
    Optional Accessories:
    • 802.3af to Passive PoE Adapter
    Contact Us:
    Email: luan@phuyenxanh.vn

    5/5 (1 Review)

    1 review for Altai C1xan

    3.0 out of 5
    0
    0
    1
    0
    0
    Write a review
    Show all Most Helpful Highest Rating Lowest Rating
    1. Avatar of phuyenxanh

      phuyenxanh

      Vùng kết nối chưa hiệu quả so với chi phí bỏ ra, tốn kém với các loại Antenna ngoài. Nhưng chung hệ thống Super WiFi Công Nghiệp thì nó vẫn là một giải pháp hoàn hảo, hệ sinh thái Altai rất tốt.

      Helpful(0) Unhelpful(0)You have already voted this

      Add a review

      Phú Yên Xanh Store
      Logo
      Shopping cart